관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
폐지
판매
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
| 분야 | 06.04 : 페인트-솔벤트; 방향성 탄화수소 |
|---|---|
| 적용범위 | 1.1 This test method describes a simplified procedure for the measurement of density or relative density of pure liquid chemicals for which accurate temperature expansion functions are known. It is restricted to liquids having vapor pressures not exceeding 79 993 Pascal (0.800 bar, 600 mm Hg (0.789 atm) at the equilibration temperature, and having viscosities not exceeding 15 cSt at 20°C. 1.2 Means are provided for reporting results in the following units: Density g/cm3 at 20°C Density g/mL at 20°C Relative density 20°C/4°C Relative density 15.56°C/15.56°C Note 1: This test method is based on the old definition of 1 L = 1.000028 dm3 (1 mL = 1.000028 cm3). In 1964 the General Conference on Weights and Measures withdrew this definition of the litre and declared that the word “litre” was a special name for the cubic decimetre, thus making 1 mL = 1 cm3 exactly. Note 2: An alternative method for determining relative density of pure liquid chemicals is Test Method D4052. 1.3 In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8, Hazards. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 |
71.060.01 : 무기화학 일반
71.080.01 : 유기화학 일반 |
| 페이지수 | 14 |
| Edition | 18 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D3505-18 REDLINE | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2018-02-15 | 폐지 |
| 2 | ASTM D3505-18 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023) | 2018-02-15 | 폐지 |
| 3 | ASTM D3505-12e1 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2012-03-01 | 구판 |
| 4 | ASTM D3505-12 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2012-03-01 | 구판 |
| 5 | ASTM D3505-96(2006) | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2006-01-01 | 구판 |
| 6 | ASTM D3505-96 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2000-01-01 | 구판 |
| 7 | ASTM D3505-96(2000) | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals | 2000-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D1293-18 - Standard Test Methods for pH of Water 상세보기
ASTM D1093-11(2017) - Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues 상세보기
ASTM D2360-11 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography (Withdrawn 2016) 상세보기
ASTM E1075-85(2004) - Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol 상세보기
ASTM D853-04 - Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons (Withdrawn 2013) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
