관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
| 분야 | 01.05 : 철강-환봉, 단조품, 베어링, 체인, 스프링 |
|---|---|
| 적용범위 | 1.1 This specification covers ferritic/austenitic (duplex) stainless steel forgings for boilers, pressure vessels, and associated equipment in grades that are also found in Specification A182/A182M. 1.2 The purchaser may specify in the order or contract any appropriate supplementary requirements that are provided in Specification A788/A788M. 1.3 Unless the order specifies the applicable “M” specification designation the material shall be furnished to the inch-pound units. 1.4 The values stated in either inch-pound or SI (metric) units are to be regarded separately as standard. Within the text and tables, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.20 : 고품질 강 |
| 페이지수 | 4 |
| Edition | 18 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A1049/A1049M-18(2023) | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2023-03-15 | 표준 |
| 2 | ASTM A1049/A1049M-18 REDLINE | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2018-05-01 | 구판 |
| 3 | ASTM A1049/A1049M-18 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2018-05-01 | 구판 |
| 4 | ASTM A1049/A1049M-10(2015) | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2015-03-01 | 구판 |
| 5 | ASTM A1049/A1049M-10 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2010-11-01 | 구판 |
| 6 | ASTM A1049/A1049M-06 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | 2006-09-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A890/A890M-18a - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application 상세보기
ASTM E94/E94M-17 - Standard Guide for Radiographic Examination Using Industrial Radiographic Film 상세보기
ASTM A1082/A1082M-16 - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications 상세보기
ASTM E1181-02(2015) - Standard Test Methods for Characterizing Duplex Grain Sizes 상세보기
ASTM E446-15 - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
