관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
| 분야 | 01.01 : 철강-배관, 튜브, 관이음쇠 |
|---|---|
| 적용범위 | 1.1 This specification2 covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2. (A) Maximum, unless range or minimum is indicated. Where ellipses (...) appear in this table, there is no requirement, and analysis for the element need not be determined or reported. (B) It is permissible to order T2 and T12 with a sulfur content of 0.045 max. See 16.3. (C) Alternatively, in lieu of this ratio minimum, the material shall have a minimum hardness of 275 HV in the hardened condition, defined as after austenitizing and cooling to room temperature but prior to tempering. Hardness testing shall be performed at mid-thickness of the product. Hardness test frequency shall be two samples of product per heat treatment lot and the hardness testing results shall be reported on the material test report. (D) Applies to both heat and product analyses. (E) The terms Niobium (Nb) and Columbium (Cb) are alternate names for the same element. (A) Maximum, unless a range or minimum is indicated. Where ellipses (...) appear in this table, there is no minimum and analysis for the element need not be determined or reported. (B) The method of analysis for Nitrogen shall be a matter of agreement between the purchaser and the producer. (C) For these alloys, there is no common grade designation. The UNS number uniquely identifies these alloys. (D) For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in Grades TP304L, TP304LN, TP316L, and TP316LN. (E) Grade S30434 shall have (Ti + 1/2 Nb) of not less than 2 times and not more than 4 times the carbon content. (F) Grade TP347LN shall have an Nb content of not less than 15 times the carbon content. (G) Grade TP348 shall have an Nb + Ta content of not less than 10 times the carbon content and not more than 1.10 %. (H) Grade TP348H shall have an Nb + Ta content of not less than 8 times the carbon content and not more than 1.10 %. (I) Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements. (J) Al + Ti shall be 0.85 % min; 1.20 % max. (K) Grade TP444 shall have Ni + Cu = 1.00 max. (L) Grade TP444 shall have Ti + Nb content not less than 0.20 + 4(C+N) and not more than 0.80 %. (M) N08020 shall have an Nb + Ta content of not less than 8 times the carbon content and not more than 1.00%. (N) The terms Niobium (Nb) and Columbium (Cb) are alternate names for the same element. 1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. 1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | |
| 페이지수 | 14 |
| Edition | 18 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A213/A213M-24 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2024-05-01 | 표준 |
| 2 | ASTM A213/A213M-24 REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2024-05-01 | 표준 |
| 3 | ASTM A213/A213M-23 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2023-05-01 | 구판 |
| 4 | ASTM A213/A213M-23 REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2023-05-01 | 구판 |
| 5 | ASTM A213/A213M-22a REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2022-11-01 | 구판 |
| 6 | ASTM A213/A213M-22a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2022-11-01 | 구판 |
| 7 | ASTM A213/A213M-22 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2022-05-01 | 구판 |
| 8 | ASTM A213/A213M-22 REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2022-05-01 | 구판 |
| 9 | ASTM A213/A213M-21b REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2021-11-01 | 구판 |
| 10 | ASTM A213/A213M-21b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2021-11-01 | 구판 |
| 11 | ASTM A213/A213M-21a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2021-05-01 | 구판 |
| 12 | ASTM A213/A213M-19a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2019-12-01 | 구판 |
| 13 | ASTM A213/A213M-19a REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2019-12-01 | 구판 |
| 14 | ASTM A213/A213M-19 REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2019-11-01 | 구판 |
| 15 | ASTM A213/A213M-19 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2019-11-01 | 구판 |
| 16 | ASTM A213/A213M-18b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2018-11-01 | 구판 |
| 17 | ASTM A213/A213M-18b REDLINE | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2018-11-01 | 구판 |
| 18 | ASTM A213/A213M-18a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2018-09-01 | 구판 |
| 19 | ASTM A213/A213M-18 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2018-03-01 | 구판 |
| 20 | ASTM A213/A213M-17 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2017-03-15 | 구판 |
| 21 | ASTM A213/A213M-15c | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2015-11-01 | 구판 |
| 22 | ASTM A213/A213M-15b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2015-09-01 | 구판 |
| 23 | ASTM A213/A213M-15a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2015-04-01 | 구판 |
| 24 | ASTM A213/A213M-15 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2015-03-01 | 구판 |
| 25 | ASTM A213/A213M-14 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2014-03-01 | 구판 |
| 26 | ASTM A213/A213M-13 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2013-04-01 | 구판 |
| 27 | ASTM A213/A213M-11a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2011-10-01 | 구판 |
| 28 | ASTM A213/A213M-11 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2011-04-01 | 구판 |
| 29 | ASTM A213/A213M-10a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2010-10-01 | 구판 |
| 30 | ASTM A213/A213M-10 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2010-04-01 | 구판 |
| 31 | ASTM A213/A213M-09b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2009-10-01 | 구판 |
| 32 | ASTM A213/A213M-09a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2009-04-01 | 구판 |
| 33 | ASTM A213/A213M-09 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2009-03-15 | 구판 |
| 34 | ASTM A213/A213M-08a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2008-10-15 | 구판 |
| 35 | ASTM A213/A213M-08 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2008-03-01 | 구판 |
| 36 | ASTM A213/A213M-07a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2007-09-01 | 구판 |
| 37 | ASTM A213/A213M-07 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2007-03-01 | 구판 |
| 38 | ASTM A213/A213M-06ae1 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2006-05-01 | 구판 |
| 39 | ASTM A213/A213M-06a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2006-05-01 | 구판 |
| 40 | ASTM A213/A213M-06 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2006-03-01 | 구판 |
| 41 | ASTM A213/A213M-05c | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2005-10-01 | 구판 |
| 42 | ASTM A213/A213M-05b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2005-09-01 | 구판 |
| 43 | ASTM A213/A213M-05a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2005-05-01 | 구판 |
| 44 | ASTM A213/A213M-05 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2005-03-01 | 구판 |
| 45 | ASTM A213/A213M-04b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2004-10-01 | 구판 |
| 46 | ASTM A213/A213M-04 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2004-03-01 | 구판 |
| 47 | ASTM A213/A213M-03c | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2003-10-01 | 구판 |
| 48 | ASTM A213/A213M-03b | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2003-09-10 | 구판 |
| 49 | ASTM A213/A213M-03a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2003-04-10 | 구판 |
| 50 | ASTM A213/A213M-03 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2003-02-10 | 구판 |
| 51 | ASTM A213/A213M-01a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2001-09-10 | 구판 |
| 52 | ASTM A213/A213M-01 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2001-09-10 | 구판 |
| 53 | ASTM A213/A213M-99e1 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 2001-09-10 | 구판 |
| 54 | ASTM A213/A213M-95a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | 구판 |
관련상품이 존재하지 않습니다.
ASTM A182/A182M-18 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service 상세보기
ASTM A479/A479M-18 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels 상세보기
ASTM A516/A516M-17 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service 상세보기
ASTM A240/A240M-17 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기
ASTM A312/A312M-17 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
