관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
| 분야 | 06.02 : 페인트-제품 및 적용; 보호용 코팅 . 도관코팅 |
|---|---|
| 적용범위 | 1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to concrete surfaces including those in safety-related areas in a nuclear facility. 1.2 Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance. It is not the intent of this practice to mandate a singular basis for all qualifications. 1.3 Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in 4.1. Reports shall be prepared as specified in Section 5, and qualification as specified in Section 6. 1.4 It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 87.020 : 페인트 도장 공정 |
| 페이지수 | 4 |
| Edition | 05(2017) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D4227-05(2023) | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 2023-04-01 | 표준 |
| 2 | ASTM D4227-05(2017) | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 2017-09-01 | 구판 |
| 3 | ASTM D4227-05(2012) | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 2012-09-15 | 구판 |
| 4 | ASTM D4227-05 | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 2005-12-01 | 구판 |
| 5 | ASTM D4227-99(2005) | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 2005-09-01 | 구판 |
| 6 | ASTM D4227-99 | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces | 1999-06-10 | 구판 |
관련상품이 존재하지 않습니다.
KS F 2405(2017 확인) - 콘크리트 압축 강도 시험방법 상세보기
ASTM C805/C805M-18 REDLINE - Standard Test Method for Rebound Number of Hardened Concrete 상세보기
ASTM C881/C881M-20a - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete 상세보기
ASTM C805/C805M-18 - Standard Test Method for Rebound Number of Hardened Concrete 상세보기
ASTM C803/C803M-18 - Standard Test Method for Penetration Resistance of Hardened Concrete 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
