관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Tin Mill Products, General Requirements
| 분야 | 01.06 : 피복 철강 제품 |
|---|---|
| 적용범위 | 1.1 This specification covers a group of common requirements, which unless otherwise specified in the purchase order or in an individual specification, shall apply to tin mill products. 1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named. Note 1: A complete metric companion to Specification A623 has been developed—Specification A623M; therefore no metric equivalents are presented in this specification. 1.3 The following safety caveat covers Annex A3 through Annex A10 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 77.140.50 : 보통 강제품 및 반제품 |
| 페이지수 | 38 |
| Edition | 16 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A623-22 | Standard Specification for Tin Mill Products, General Requirements | 2022-03-01 | 표준 |
| 2 | ASTM A623-22 REDLINE | Standard Specification for Tin Mill Products, General Requirements | 2022-03-01 | 표준 |
| 3 | ASTM A623-16 | Standard Specification for Tin Mill Products, General Requirements | 2016-12-01 | 구판 |
| 4 | ASTM A623-16 REDLINE | Standard Specification for Tin Mill Products, General Requirements | 2016-12-01 | 구판 |
| 5 | ASTM A623-11 | Standard Specification for Tin Mill Products, General Requirements | 2011-10-01 | 구판 |
| 6 | ASTM A623-10 | Standard Specification for Tin Mill Products, General Requirements | 2010-10-01 | 구판 |
| 7 | ASTM A623-09 | Standard Specification for Tin Mill Products, General Requirements | 2009-10-01 | 구판 |
| 8 | ASTM A623-08 | Standard Specification for Tin Mill Products, General Requirements | 2008-01-01 | 구판 |
| 9 | ASTM A623-06a | Standard Specification for Tin Mill Products, General Requirements | 2006-10-01 | 구판 |
| 10 | ASTM A623-06 | Standard Specification for Tin Mill Products, General Requirements | 2006-03-01 | 구판 |
| 11 | ASTM A623-05 | Standard Specification for Tin Mill Products, General Requirements | 2005-09-01 | 구판 |
| 12 | ASTM A623-03 | Standard Specification for Tin Mill Products, General Requirements | 2003-09-10 | 구판 |
| 13 | ASTM A623-02a | Standard Specification for Tin Mill Products, General Requirements | 2002-11-10 | 구판 |
| 14 | ASTM A623-00 | Standard Specification for Tin Mill Products, General Requirements | 2002-05-10 | 구판 |
| 15 | ASTM A623-02 | Standard Specification for Tin Mill Products, General Requirements | 2002-05-10 | 구판 |
관련상품이 존재하지 않습니다.
DIN EN 10202:2021-03 - Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; German and English version prEN 10202:2021 상세보기
ASTM A1008/A1008M-21 REDLINE - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable 상세보기
ASTM A568/A568M-19a REDLINE - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for 상세보기
ASTM A370-17a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products 상세보기
AS/NZS 1595:1998 (R2016) - Cold-rolled, unalloyed, steel sheet and strip 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
