관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Methods for Void Content of Reinforced Plastics
| 분야 | 08.01 : 플라스틱 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 These test methods cover the void content of reinforced plastics or “composites.” The test methods are applicable to composites for which the effects of ignition on the materials are known. Most plastics, glass, and reinforcements fall into this class. These test methods are not applicable to composites for which the effects of ignition on the plastics, the reinforcement, and any fillers are unknown. This class may include silicone resins, which do not burn off completely, reinforcements consisting of metals, organic materials, or inorganic materials which may gain or lose weight, and fillers consisting of oxides, carbonates, etc., which may gain or lose weight. Note that separate weight loss tests of individual materials will usually, but not necessarily, give the same result as when all the materials are combined. Note 1: There is no known ISO equivalent to these test methods. 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 83.120 : 강화 플라스틱 |
| 페이지수 | 4 |
| Edition | 16 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D2734-23 | Standard Test Methods for Void Content of Reinforced Plastics | 2023-10-01 | 표준 |
| 2 | ASTM D2734-23 REDLINE | Standard Test Methods for Void Content of Reinforced Plastics | 2023-10-01 | 표준 |
| 3 | ASTM D2734-16 REDLINE | Standard Test Methods for Void Content of Reinforced Plastics | 2016-09-01 | 구판 |
| 4 | ASTM D2734-16 | Standard Test Methods for Void Content of Reinforced Plastics | 2016-09-01 | 구판 |
| 5 | ASTM D2734-09 | Standard Test Methods for Void Content of Reinforced Plastics | 2009-09-01 | 구판 |
| 6 | ASTM D2734-94(2003) | Standard Test Methods for Void Content of Reinforced Plastics | 2003-01-10 | 구판 |
| 7 | ASTM D2734-94 | Standard Test Methods for Void Content of Reinforced Plastics | 1994-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D7137/D7137M-17 - Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates 상세보기
ASTM D5766/D5766M-11(2018) - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates 상세보기
ASTM D3518/D3518M-18 - Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate 상세보기
ASTM D3410/D3410M-16 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading 상세보기
ASTM D3530-97(2015) - Standard Test Method for Volatiles Content of Composite Material Prepreg 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
