관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Liquid Penetrant Testing
| 분야 | 03.03 : 비 파괴검사 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 This practice establishes the minimum requirements for conducting liquid penetrant examination of nonporous metal, and nonmetal components. Note 1: This practice replaces MIL-STD-6866. 1.2 The penetrant examination processes described in this practice are applicable to in-process, final, and maintenance (in-service) examinations. These processes are applicable for the detection of discontinuities, such as lack of fusion, corrosion, cracks, laps, cold shuts, and porosity, that are open or connected to the surface of the component under examination. 1.3 Caution must be exercised in the usage of elevated temperature with components manufactured from thermoplastic materials. Also, some cleaners, penetrants, and developers can have a deleterious effect on nonmetallic materials such as plastics. Prior to examination, tests should be conducted to ensure that none of the cleaning or examination materials are harmful to the components to be examined. 1.4 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 19.040 : 환경 시험 |
| 페이지수 | 11 |
| Edition | 16 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E1417/E1417M-21e1 | Standard Practice for Liquid Penetrant Testing | 2021-09-01 | 표준 |
| 2 | ASTM E1417/E1417M-21 | Standard Practice for Liquid Penetrant Testing | 2021-09-01 | 구판 |
| 3 | ASTM E1417/E1417M-21 REDLINE | Standard Practice for Liquid Penetrant Testing | 2021-09-01 | 구판 |
| 4 | ASTM E1417/E1417M-20 | Standard Practice for Liquid Penetrant Testing | 2020-12-01 | 구판 |
| 5 | ASTM E1417/E1417M-16 REDLINE | Standard Practice for Liquid Penetrant Testing | 2016-06-15 | 구판 |
| 6 | ASTM E1417/E1417M-16 | Standard Practice for Liquid Penetrant Testing | 2016-06-15 | 구판 |
| 7 | ASTM E1417/E1417M-13 | Standard Practice for Liquid Penetrant Testing | 2013-06-01 | 구판 |
| 8 | ASTM E1417/E1417M-11e1 | Standard Practice for Liquid Penetrant Testing | 2011-08-15 | 구판 |
| 9 | ASTM E1417/E1417M-11 | Standard Practice for Liquid Penetrant Testing | 2011-08-15 | 구판 |
관련상품이 존재하지 않습니다.
IEC 61000-4-11:2020/COR1:2020 - Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase 상세보기
IEC 61000-4-11:2020 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase 상세보기
ASTM E8/E8M-21 - Standard Test Methods for Tension Testing of Metallic Materials 상세보기
ASTM E1209-18 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process 상세보기
ASTM E1742/E1742M-18 - Standard Practice for Radiographic Examination 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
