관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
| 분야 | 03.02 : 마모 및 침식;금속 부식 |
|---|---|
| 적용범위 | 1.1 This practice covers procedures for designing, preparing, and using bent-beam stress-corrosion specimens. 1.2 Different specimen configurations are given for use with different product forms, such as sheet or plate. This practice is applicable to specimens of any metal that are stressed to levels less than the elastic limit of the material, and therefore, the applied stress can be accurately calculated or measured (see Note 1). Stress calculations by this practice are not applicable to plastically stressed specimens. Note 1: It is the nature of these practices that only the applied stress can be calculated. Since stress-corrosion cracking is a function of the total stress, for critical applications and proper interpretation of results, the residual stress (before applying external stress) or the total elastic stress (after applying external stress) should be determined by appropriate nondestructive methods, such as X-ray diffraction (1).2 1.3 Test procedures are given for stress-corrosion testing by exposure to gaseous and liquid environments. 1.4 The bent-beam test is best suited for flat product forms, such as sheet, strip, and plate. For plate material the bent-beam specimen is more difficult to use because more rugged specimen holders must be built to accommodate the specimens. A double-beam modification of a four-point loaded specimen to utilize heavier materials is described in 10.5. 1.5 The exposure of specimens in a corrosive environment is treated only briefly since other practices deal with this aspect, for example, Specification D1141, and Practices G30, G36, G44, G50, and G85. The experimenter is referred to ASTM Special Technical Publication 425 (2). 1.6 The bent-beam practice generally constitutes a constant strain (deflection) test. Once cracking has initiated, the state of stress at the tip of the crack as well as in uncracked areas has changed, and therefore, the known or calculated stress or strain values discussed in this practice apply only to the state of stress existing before initiation of cracks. 1.7 The values stated in SI units are to be regarded as standard. The inch-pound values in parentheses are provided for information. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For more specific safety hazard information see Section 7 and 12.1.) |
| 국제분류(ICS)코드 |
77.060 : 금속 부식
77.040.10 : 금속의 기계적 시험 |
| 페이지수 | 8 |
| Edition | 99(2016) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM G39-99(2021) | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 2021-05-01 | 표준 |
| 2 | ASTM G39-99(2016) | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 2016-05-01 | 구판 |
| 3 | ASTM G39-99(2011) | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 2011-03-01 | 구판 |
| 4 | ASTM G39-99(2005) | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 2005-05-01 | 구판 |
| 5 | ASTM G39-99 | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens | 1999-01-10 | 구판 |
관련상품이 존재하지 않습니다.
DIN EN 1522:1999-02 - Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification 상세보기
NIJ 0101.06 2008 Edition, July 2008 - Ballistic Resistance of Body Armor 상세보기
UL 2703 1st Edition, May 29, 2019 - UL Standard for Safety Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels Includes all amendments and changes through Revision Page(s) , September 5, 2019 상세보기
MIL-STD-662 Revision F, December 18, 1997 - V50 BALLISTIC TEST FOR ARMOR 상세보기
DIN 50125:2016-12 - Testing of metallic materials - Tensile test pieces 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
