ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM E2994-16

Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)

- 발행일 : 2016-04-15
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	140,700원
영어	PRINT	140,700원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

03.05 : 금속, 광석 및 관련 재료의 분석화학

적용범위

1.1 This test method describes the analysis of titanium and its alloys by spark atomic emission spectrometry (Spark-AES) and glow discharge atomic emission spectrometry (GD-AES). The titanium specimen to be analyzed may be in the form of a disk, casting, foil, sheet, plate, extrusion or some other wrought form or shape. The elements and ranges covered in the scope by spark-AES of this method are listed below.

Element	Tested Mass Fraction Range (%)
Aluminum	0.008 to 7.0
Chromium	0.006 to 0.1
Copper	0.014 to 0.1
Iron	0.043 to 0.3
Manganese	0.005 to 0.1
Molybdenum	0.014 to 0.1
Nickel	0.006 to 0.1
Silicon	0.018 to 0.1
Tin	0.02 to 0.1
Vanadium	0.015 to 5.0
Zirconium	0.013 to 0.1

1.1.1 The elements oxygen, nitrogen, carbon, niobium, boron, yttrium, palladium, and ruthenium, were included in the ILS but the data did not contain the required six laboratories. Precision tables were provided for informational use only.

1.2 The elements and ranges covered in the scope by GD-AES of this method are listed below.

Element	Tested Mass Fraction Range (%)
Aluminum	0.02 to 7.0
Chromium	0.006 to 0.1
Copper	0.028 to 0.1
Iron	0.09 to 0.3
Molybdenum	0.016 to 0.1
Nickel	0.006 to 0.1
Silicon	0.018 to 0.1
Tin	0.022 to 0.1
Vanadium	0.054 to 5.0
Zirconium	0.026 to 0.1

1.3 The mass fractions given in the above scope tables are the ranges validated through the interlaboratory study. However, it is known that the techniques used in this standard allow the useable range to be extended higher or lower based on individual instrument and laboratory capabilities, and the spectral characteristics of the specific element wavelength being used. Laboratories must provide sufficient evidence of method validation when extending the analytical range as described in Guide E2857 Validating Analytical Methods.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard statements are given in Section 9.

국제분류(ICS)코드

77.120.50 : 티타늄 및 티타늄 합금

페이지수

Edition

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM E2994-21	Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)	2021-12-01	표준
2	ASTM E2994-21 REDLINE	Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)	2021-12-01	표준
3	ASTM E2994-16	Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)	2016-04-15	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM E2371-13 - Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) 상세보기

ASTM B243-19 - Standard Terminology of Powder Metallurgy 상세보기

ASTM B822-17 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering 상세보기

ASTM E11-17 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves 상세보기

ASTM E1941-10(2016) - Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM E2994-16

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기