관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
| 분야 | 14.04 : 시험소 기계 장치; 재료의 퇴화; 여과; SI; 화재 안전 |
|---|---|
| 적용범위 | 1.1 This guide applies to nonmetallic materials, (hereinafter called materials) under consideration for oxygen or oxygen-enriched fluid service, direct or indirect, as defined below. It is intended for use in selecting materials for applications in connection with the production, storage, transportation, distribution, or use of oxygen. It is concerned primarily with the properties of a material associated with its relative susceptibility to ignition and propagation of combustion; it does not involve mechanical properties, potential toxicity, outgassing, reactions between various materials in the system, functional reliability, or performance characteristics such as physical aging, degradation, abrasion, hardening, or embrittlement, except when these might contribute to an ignition. 1.2 When this document was originally published in 1980, it addressed both metals and nonmetals. Its scope has been narrowed to address only nonmetals and a separate standard Guide G94 has been developed to address metals. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1: The American Society for Testing and Materials takes no position respecting the validity of any evaluation methods asserted in connection with any item mentioned in this guide. Users of this guide are expressly advised that determination of the validity of any such evaluation methods and data and the risk of use of such evaluation methods and data are entirely their own responsibility. Note 2: In evaluating materials, any mixture with oxygen exceeding atmospheric concentration at pressures higher than atmospheric should be evaluated from the hazard point of view for possible significant increase in material combustibility. |
| 국제분류(ICS)코드 | 19.040 : 환경 시험 |
| 페이지수 | 26 |
| Edition | 15 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM G63-15(2023) | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 2023-03-01 | 표준 |
| 2 | ASTM G63-15 | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 2015-11-01 | 구판 |
| 3 | ASTM G63-15 REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 2015-11-01 | 구판 |
| 4 | ASTM G63-99(2007) | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 2007-03-15 | 구판 |
| 5 | ASTM G63-99 | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service | 1999-03-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM G128/G128M-15 - Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems 상세보기
ASTM G127-15 - Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems 상세보기
ASTM G94-05(2014) - Standard Guide for Evaluating Metals for Oxygen Service 상세보기
ASTM G88-13 - Standard Guide for Designing Systems for Oxygen Service 상세보기
CGA G-4.4 :2020 - Oxygen Pipeline and Piping Systems 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
