관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
| 분야 | 06.01 : 페인트-화학적, 물리적, 광학적특성 시험; 현상 |
|---|---|
| 적용범위 | 1.1 This practice covers the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100 % relative humidity so that condensation forms on all surfaces of test specimens. 1.2 This practice uses the technique of creating a slight temperature differential within the exposure area to form condensation on the coated specimens. As the warmer saturated air passes the cooler specimens, water is deposited onto the specimens in the form of condensation. 1.3 This practice places the entire specimen in the exposure area allowing condensation to form on all surfaces. This makes this practice suitable for flat panels as well as large or 3D objects. This practice differs from other methods where condensation is only formed on the front coating surface, while the back surface is outside the exposure area. Other tests may also deposit water droplets on the surface but where the source is not from condensation (for example, water spray). Note 1: Alternative practices for testing the water resistance of coatings include Practices D870, D1735, and D4585. 1.4 This practice is limited to the methods of obtaining, measuring, and controlling the conditions and procedures of tests conducted in 100 % relative humidity. It does not specify specimen preparation, or evaluation of results. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 87.040 : 페인트 및 니스 |
| 페이지수 | 7 |
| Edition | 15 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D2247-15(2020) | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity | 2020-06-01 | 구판 |
| 2 | ASTM D2247-15(2020)e1 | Standard Practice for Testing Water Resistance of Coatings in 100?% Relative Humidity | 2020-06-01 | 표준 |
| 3 | ASTM D2247-15 REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity | 2015-12-01 | 구판 |
| 4 | ASTM D2247-15 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity | 2015-12-01 | 구판 |
| 5 | ASTM D2247-11 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | 2011-02-01 | 구판 |
| 6 | ASTM D2247-10 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | 2010-07-01 | 구판 |
| 7 | ASTM D2247-02 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | 2002-08-10 | 구판 |
| 8 | ASTM D2247-99 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | 1999-12-10 | 구판 |
| 9 | ASTM D2247-92 | Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity | 구판 | |
| 10 | ASTM D2247-68(1973) | Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity | 구판 |
관련상품이 존재하지 않습니다.
ISO 105-G02:1993 - Textiles — Tests for colour fastness — Part G02: Colour fastness to burnt-gas fumes 상세보기
ISO 3795:1989 - Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials 상세보기
ISO 105-A02:1993 - Textiles -- Tests for colour fastness -- Part A02: Grey scale for assessing change in colour 상세보기
ASTM D523-14(2018) - Standard Test Method for Specular Gloss 상세보기
ASTM D6182-00(2015) - Standard Test Method for Flexibility and Adhesion of Finish on Leather 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
