관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 04.07 : 건축실 및 실링재; 소방재규정 |
---|---|
적용범위 | 1.1 This practice is applicable to building elements required to be subjected to the impact, erosion, and cooling effects of a hose stream as part of a fire-test-response standard. Building elements include, but are not limited to, wall and partition assemblies, fire-resistive joint systems, and doors. 1.2 This practice shall register performance of the building element under specific hose stream conditions. It shall not imply that, either after exposure or under other conditions, the structural capability of the building element is intact or that the building element is suitable for use. 1.3 The result derived from this practice is one factor in assessing the integrity of building elements after fire exposure. The practice prescribes a standard hose stream exposure for comparing performance of building elements after fire exposure and evaluates various materials and construction techniques under common conditions. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The text of this standard references notes which provide explanatory material. These notes shall not be considered as requirements of the standard. 1.6 This fire standard cannot be used to provide quantitative measures. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
국제분류(ICS)코드 |
13.220.99 : 방화에 관련된 기타 규격
23.040.70 : 호스 및 호스 조립품 |
페이지수 | 6 |
Edition | 15b |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM E2226-23a | Standard Practice for Application of Hose Stream | 2023-12-01 | 표준 |
2 | ASTM E2226-23a REDLINE | Standard Practice for Application of Hose Stream | 2023-12-01 | 표준 |
3 | ASTM E2226-23 | Standard Practice for Application of Hose Stream | 2023-10-15 | 구판 |
4 | ASTM E2226-23 REDLINE | Standard Practice for Application of Hose Stream | 2023-10-15 | 구판 |
5 | ASTM E2226-15b(2019) | Standard Practice for Application of Hose Stream | 2019-03-01 | 구판 |
6 | ASTM E2226-15b | Standard Practice for Application of Hose Stream | 2015-10-01 | 구판 |
7 | ASTM E2226-15b REDLINE | Standard Practice for Application of Hose Stream | 2015-10-01 | 구판 |
8 | ASTM E2226-15a | Standard Practice for Application of Hose Stream | 2015-06-01 | 구판 |
9 | ASTM E2226-15 | Standard Practice for Application of Hose Stream | 2015-04-01 | 구판 |
10 | ASTM E2226-12 | Standard Practice for Application of Hose Stream | 2012-04-01 | 구판 |
11 | ASTM E2226-11 | Standard Practice for Application of Hose Stream | 2011-10-01 | 구판 |
12 | ASTM E2226-10e1 | Standard Practice for Application of Hose Stream | 2010-04-15 | 구판 |
13 | ASTM E2226-10 | Standard Practice for Application of Hose Stream | 2010-04-15 | 구판 |
14 | ASTM E2226-08 | Standard Practice for Application of Hose Stream | 2008-05-01 | 구판 |
15 | ASTM E2226-07 | Standard Practice for Application of Hose Stream | 2007-11-01 | 구판 |
16 | ASTM E2226-02 | Standard Practice for Application of Hose Stream | 2002-08-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM E119-18ce1 - Standard Test Methods for Fire Tests of Building Construction and Materials 상세보기
ASTM E2174-18 - Standard Practice for On-Site Inspection of Installed Firestops 상세보기
ASTM E1529-16e1 - Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies 상세보기
ASTM E814-13a(2017) - Standard Test Method for Fire Tests of Penetration Firestop Systems 상세보기
ASTM E2393-10a(2015) - Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기