관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
| 분야 | 15.10 : 포장 |
|---|---|
| 적용범위 | 1.1 These test methods are intended to determine the ability of a package or product to withstand laboratory simulated horizontal impact forces. 1.2 The horizontal impacts used in these test methods are programmed shock inputs that represent the hazards as they occur in the shipping and handling environments. The environmental hazards may include rail switching impacts, lift truck marshalling impacts, and so forth. The following test methods apply: 1.2.1 Method A, Rail Car Switching Impact—This test method simulates the types of shock pulses experienced by lading in rail car switching, with the use of a rigid bulkhead on the leading edge of the test carriage, to simulate the end wall of a railcar and shock programming devices to produce representative shock pulses. With the use of backloading, this test method may also be used to simulate compressive forces experienced by lading loads during rail car switching. It is suitable for tests of individual containers or systems as they are shipped in rail cars. It may also be used to evaluate the effectiveness of pallet patterns to determine the effect of interaction between containers during rail switching operation impacts. 1.2.2 Method B, Marshalling Impact Tests of Unit Loads—This test method assesses the ability of unit loads to withstand the forces encountered during marshalling or loading operations. 1.3 The test levels may be varied to represent the mode on shipping and handling used for the item under test. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 55.020 : 일반용 포장 |
| 페이지수 | 5 |
| Edition | 98(2015) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D4003-98(2024) | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 2024-10-01 | 표준 |
| 2 | ASTM D4003-98(2019)e1 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 2019-08-01 | 구판 |
| 3 | ASTM D4003-98(2015) | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 2015-10-01 | 구판 |
| 4 | ASTM D4003-98(2009) | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 2009-03-01 | 구판 |
| 5 | ASTM D4003-98(2003) | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 1998-04-10 | 구판 |
| 6 | ASTM D4003-98 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems | 1998-04-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D6344-04(2017) - Standard Test Method for Concentrated Impacts to Transport Packages 상세보기
ASTM D4332-14 - Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing 상세보기
ASTM D3103-14 - Standard Test Method for Thermal Insulation Performance of Distribution Packages 상세보기
ASTM D6179-07(2014) - Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates 상세보기
ASTM D6055-96(2014) - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
