관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Guide for Selection and Use of Flat Strapping Materials1
| 분야 | 15.10 : 포장 |
|---|---|
| 적용범위 | 1.1 This guide1 covers information on flat strapping materials (steel and nonmetallic) for the prospective user wanting initial guidance in selecting a strapping material and information on suggested application methods for use in packaging (closing, reinforcing, baling, bundling, unitizing, or palletizing), and loading applications (load unitization and securement to transport vehicle). The use applies to handling, securement, storage, and distribution systems. 1.2 Carrier associations have established certain packaging and loading requirements that (in some cases) specify the type of strap, the minimum size or strength, the type of joint or seal, and the number of straps, seals, and joints that must be used for particular types of shipments or under certain conditions. Users should consult with their carriers initially to determine if there are applicable published requirements. Individual carriers may establish their own requirements. (See 2.2.) 1.3 Limitations—This guide is not intended to give specific information as to how strapping must be used in any particular packaging or loading situation. Rather, it is intended to be informational in nature and is offered as a starting point for the testing of strapping being considered by the user. Thorough user testing is essential, as is a review of pertinent regulations that can influence strap selection (size and type), and application methods. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazard guidelines, however, are provided in Section 5. |
| 국제분류(ICS)코드 | 55.040 : 포장 자재 및 부속품 |
| 페이지수 | 20 |
| Edition | 14a |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D4675-14a(2022) | Standard Guide for Selection and Use of Flat Strapping Materials1 | 2022-10-01 | 표준 |
| 2 | ASTM D4675-14a | Standard Guide for Selection and Use of Flat Strapping Materials1 | 2014-05-01 | 구판 |
| 3 | ASTM D4675-14a REDLINE | Standard Guide for Selection and Use of Flat Strapping Materials1 | 2014-05-01 | 구판 |
| 4 | ASTM D4675-14 | Standard Guide for Selection and Use of Flat Strapping Materials | 2014-04-01 | 구판 |
| 5 | ASTM D4675-09e1 | Standard Guide for Selection and Use of Flat Strapping Materials | 2009-03-01 | 구판 |
| 6 | ASTM D4675-09 | Standard Guide for Selection and Use of Flat Strapping Materials | 2009-03-01 | 구판 |
| 7 | ASTM D4675-06e2 | Standard Guide for Selection and Use of Flat Strapping Materials | 2006-10-01 | 구판 |
| 8 | ASTM D4675-06e1 | Standard Guide for Selection and Use of Flat Strapping Materials | 2006-10-01 | 구판 |
| 9 | ASTM D4675-06 | Standard Guide for Selection and Use of Flat Strapping Materials | 2006-10-01 | 구판 |
| 10 | ASTM D4675-03 | Standard Guide for Selection and Use of Flat Strapping Materials | 2003-04-10 | 구판 |
| 11 | ASTM D4675-00 | Standard Guide for Selection and Use of Flat Strapping Materials | 2000-04-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D3951-18 - Standard Practice for Commercial Packaging 상세보기
ASTM D6179-07(2014) - Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates 상세보기
ASTM F22-13 - Standard Test Method for Hydrophobic Surface Films by the Water-Break Test 상세보기
ASTM D5486/D5486M-06(2012) - Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing 상세보기
ASTM F22-02(2007) - Standard Test Method for Hydrophobic Surface Films by the Water-Break Test 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
