관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
| 분야 | 01.02 : 주철-철합금 |
|---|---|
| 적용범위 | 1.1 This practice covers procedures and definitions for estimating ferrite content in certain grades of austenitic iron-chromium-nickel alloy castings that have compositions balanced to create the formation of ferrite as a second phase in amounts controlled to be within specified limits. Methods are described for estimating ferrite content by chemical, magnetic, and metallographic means. 1.2 The grades covered by this practice are: CF-3, CF-3A, CF-8, CF-8A, CF-3M, CF-3MA, CF-8M, CF-8C, CG-8M, and CH-10. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the practice. 1.3.1 Within the text, the SI units are shown in brackets. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | 77.140.80 : 강 및 주철 및 단조 |
| 페이지수 | 7 |
| Edition | 14 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A800/A800M-20 | Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite | 2020-05-01 | 표준 |
| 2 | ASTM A800/A800M-20 REDLINE | Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite | 2020-05-01 | 표준 |
| 3 | ASTM A800/A800M-14 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2014-05-01 | 구판 |
| 4 | ASTM A800/A800M-14 REDLINE | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2014-05-01 | 구판 |
| 5 | ASTM A800/A800M-10 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2010-10-01 | 구판 |
| 6 | ASTM A800/A800M-01(2006) | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2001-03-10 | 구판 |
| 7 | ASTM A800/A800M-91(1997)e1 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2001-03-10 | 구판 |
| 8 | ASTM A800/A800M-01 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | 2001-03-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM G76-18 - Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets 상세보기
ASTM A182/A182M-18a - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service 상세보기
ASTM A1011/A1011M-18a - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength 상세보기
ASTM A53/A53M-18 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless 상세보기
ASTM A686-92(2016) - Standard Specification for Tool Steel, Carbon 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
