관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Measurement of Computed Tomography (CT) System Performance
| 분야 | 03.03 : 비 파괴검사 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 This test method provides instruction for determining the spatial resolution and contrast sensitivity in X-ray and γ-ray computed tomography (CT) images. The determination is based on examination of the CT image of a uniform disk of material. The spatial resolution measurement is derived from an image analysis of the sharpness at the edge of the disk. The contrast sensitivity measurement is derived from an image analysis of the statistical noise at the center of the disk. 1.2 This test method is more quantitative and less susceptible to interpretation than alternative approaches because the required disk is easy to fabricate and the analysis is immune to cupping artifacts. This test method may not yield meaningful results if the disk image occupies less than a significant fraction of the field of view. 1.3 This test method may also be used to evaluate other performance parameters. Among those characteristics of a CT system that are detectable with this test method are: the mid-frequency enhancement of the reconstruction kernel, the presence (or absence) of detector crosstalk, the undersampling of views, and the clipping of unphysical (that is, negative) CT numbers (see Air Force Technical Report WL-TR-94-40212). It is highly likely that other characteristics as well can be detected with this test method. |
| 국제분류(ICS)코드 | |
| 페이지수 | 5 |
| Edition | 95(2013) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E1695-20 REDLINE | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2020-06-01 | 표준 |
| 2 | ASTM E1695-20 | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2020-06-01 | 표준 |
| 3 | ASTM E1695-95(2013) | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2013-06-01 | 표준 |
| 4 | ASTM E1695-95(2006)e1 | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2006-12-01 | 구판 |
| 5 | ASTM E1695-95 | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2001-01-01 | 구판 |
| 6 | ASTM E1695-95(2001) | Standard Test Method for Measurement of Computed Tomography (CT) System Performance | 2001-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F3303-18 - Standard for Additive Manufacturing ? Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications 상세보기
ASTM E2737-10(2018) - Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability 상세보기
ASTM F382-17 - Standard Specification and Test Method for Metallic Bone Plates 상세보기
ASTM F3122-14 - Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes 상세보기
ASTM F2971-13 - Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
