ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM E1820-11e1

Standard Test Method for Measurement of Fracture Toughness

- 발행일 : 2011-05-01
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	199,400원
영어	PRINT	199,400원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야	03.01 : 금속-기계적 시험;가열 및 저온시험;금속 조직학
적용범위	1.1 This test method covers procedures and guidelines for the determination of fracture toughness of metallic materials using the following parameters: K, J, and CTOD (δ). Toughness can be measured in the R-curve format or as a point value. The fracture toughness determined in accordance with this test method is for the opening mode (Mode I) of loading. 1.2 The recommended specimens are single-edge bend, [SE(B)], compact, [C(T)], and disk-shaped compact, [DC(T)]. All specimens contain notches that are sharpened with fatigue cracks. 1.2.1 Specimen dimensional (size) requirements vary according to the fracture toughness analysis applied. The guidelines are established through consideration of material toughness, material flow strength, and the individual qualification requirements of the toughness value per values sought. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—Other standard methods for the determination of fracture toughness using the parameters K, J, and CTOD are contained in Test Methods E399, E1290, and E1921. This test method was developed to provide a common method for determining all applicable toughness parameters from a single test.
국제분류(ICS)코드	77.040.10 : 금속의 기계적 시험
페이지수	58
Edition	11e1

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM E1820-24	Standard Test Method for Measurement of Fracture Toughness	2024-05-01	표준
2	ASTM E1820-24 REDLINE	Standard Test Method for Measurement of Fracture Toughness	2024-05-01	표준
3	ASTM E1820-23b REDLINE	Standard Test Method for Measurement of Fracture Toughness	2023-06-01	구판
4	ASTM E1820-23b	Standard Test Method for Measurement of Fracture Toughness	2023-06-01	구판
5	ASTM E1820-23a	Standard Test Method for Measurement of Fracture Toughness	2023-05-01	구판
6	ASTM E1820-23a REDLINE	Standard Test Method for Measurement of Fracture Toughness	2023-05-01	구판
7	ASTM E1820-23 REDLINE	Standard Test Method for Measurement of Fracture Toughness	2023-02-01	구판
8	ASTM E1820-23	Standard Test Method for Measurement of Fracture Toughness	2023-02-01	구판
9	ASTM E1820-22	Standard Test Method for Measurement of Fracture Toughness	2022-07-15	구판
10	ASTM E1820-22e1	Standard Test Method for Measurement of Fracture Toughness	2022-07-15	구판
11	ASTM E1820-21	Standard Test Method for Measurement of Fracture Toughness	2021-12-01	구판
12	ASTM E1820-21 REDLINE	Standard Test Method for Measurement of Fracture Toughness	2021-12-01	구판
13	ASTM E1820-20b REDLINE	Standard Test Method for Measurement of Fracture Toughness	2020-09-01	구판
14	ASTM E1820-20b	Standard Test Method for Measurement of Fracture Toughness	2020-09-01	구판
15	ASTM E1820-20a	Standard Test Method for Measurement of Fracture Toughness	2020-06-01	구판
16	ASTM E1820-20ae1	Standard Test Method for Measurement of Fracture Toughness	2020-06-01	구판
17	ASTM E1820-20a REDLINE	Standard Test Method for Measurement of Fracture Toughness	2020-06-01	구판
18	ASTM E1820-20	Standard Test Method for Measurement of Fracture Toughness	2020-01-01	구판
19	ASTM E1820-20e1	Standard Test Method for Measurement of Fracture Toughness	2020-01-01	구판
20	ASTM E1820-20 REDLINE	Standard Test Method for Measurement of Fracture Toughness	2020-01-01	구판
21	ASTM E1820-18a	Standard Test Method for Measurement of Fracture Toughness	2018-11-01	구판
22	ASTM E1820-18ae1	Standard Test Method for Measurement of Fracture Toughness	2018-11-01	구판
23	ASTM E1820-18 REDLINE	Standard Test Method for Measurement of Fracture Toughness	2018-05-01	구판
24	ASTM E1820-18	Standard Test Method for Measurement of Fracture Toughness	2018-05-01	구판
25	ASTM E1820-17a	Standard Test Method for Measurement of Fracture Toughness	2017-12-01	구판
26	ASTM E1820-17	Standard Test Method for Measurement of Fracture Toughness	2017-06-01	구판
27	ASTM E1820-16	Standard Test Method for Measurement of Fracture Toughness	2016-12-01	구판
28	ASTM E1820-15ae1	Standard Test Method for Measurement of Fracture Toughness	2015-10-15	구판
29	ASTM E1820-15a	Standard Test Method for Measurement of Fracture Toughness	2015-10-15	구판
30	ASTM E1820-15	Standard Test Method for Measurement of Fracture Toughness	2015-06-01	구판
31	ASTM E1820-13	Standard Test Method for Measurement of Fracture Toughness	2013-11-15	구판
32	ASTM E1820-13e1	Standard Test Method for Measurement of Fracture Toughness	2013-11-15	구판
33	ASTM E1820-11e2	Standard Test Method for Measurement of Fracture Toughness	2011-05-01	구판
34	ASTM E1820-11e1	Standard Test Method for Measurement of Fracture Toughness	2011-05-01	구판
35	ASTM E1820-11	Standard Test Method for Measurement of Fracture Toughness	2011-05-01	구판
36	ASTM E1820-09e1	Standard Test Method for Measurement of Fracture Toughness	2009-11-01	구판
37	ASTM E1820-09	Standard Test Method for Measurement of Fracture Toughness	2009-11-01	구판
38	ASTM E1820-08a	Standard Test Method for Measurement of Fracture Toughness	2008-12-01	구판
39	ASTM E1820-08	Standard Test Method for Measurement of Fracture Toughness	2008-04-01	구판
40	ASTM E1820-06e1	Standard Test Method for Measurement of Fracture Toughness	2006-07-01	구판
41	ASTM E1820-06	Standard Test Method for Measurement of Fracture Toughness	2006-07-01	구판
42	ASTM E1820-05a	Standard Test Method for Measurement of Fracture Toughness	2005-12-01	구판
43	ASTM E1820-05	Standard Test Method for Measurement of Fracture Toughness	2005-07-01	구판
44	ASTM E1820-99a	Standard Test Method for Measurement of Fracture Toughness	2001-06-10	구판
45	ASTM E1820-01	Standard Test Method for Measurement of Fracture Toughness	2001-06-10	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

함께 구입한 상품이 존재하지 않습니다.
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM E1820-11e1

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기