관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
| 분야 | 05.06 : 기체화 연료; 석탄 및 코커스 |
|---|---|
| 적용범위 | 1.1 This test method2 covers the determination of the relative grindability or ease of pulverization of coals in comparison with coals chosen as standards. A prepared and sized sample receives a definite amount of grinding energy in a miniature pulverizer, and the size consist of the pulverized product is determined by sieving. The resultant size consist is used to produce an index relative to the ease of grinding [Hardgrove Grindability Index (HGI)]. 1.1.1 Some coals, such as some high-volatile bituminous, subbituminous, and lignite coals, can undergo physical change as the natural or seam moisture is released during handling and preparation. This change is often sufficient to alter the grindability characteristics that will be reported when tested in the laboratory and could produce different indices dependent on the conditions of drying and the moisture level of the 1.18 × 0.60 mm (No. 16 × 30) (see Test Method D4749) materials used for the test. Therefore, the repeatability and reproducibility cited in this test method may not apply for these high-volatile bituminous, subbituminous, and lignite coals. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
| 국제분류(ICS)코드 | |
| 페이지수 | 15 |
| Edition | 12 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D409/D409M-24 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2024-07-01 | 표준 |
| 2 | ASTM D409/D409M-24 REDLINE | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2024-07-01 | 표준 |
| 3 | ASTM D409/D409M-16 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2016-09-01 | 구판 |
| 4 | ASTM D409/D409M-16 REDLINE | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2016-09-01 | 구판 |
| 5 | ASTM D409/D409M-12 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2012-10-01 | 구판 |
| 6 | ASTM D409/D409M-12e1 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2012-10-01 | 구판 |
| 7 | ASTM D409/D409M-11ae1 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2011-12-01 | 구판 |
| 8 | ASTM D409/D409M-11a | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2011-12-01 | 구판 |
| 9 | ASTM D409/D409M-11 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2011-04-01 | 구판 |
| 10 | ASTM D409/D409M-09ae1 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2009-11-01 | 구판 |
| 11 | ASTM D409/D409M-09a | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2009-11-01 | 구판 |
| 12 | ASTM D409/D409M-09 | Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method | 2009-05-01 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
