ASTM B637-12 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM B637-12

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

- 발행일 : 2012-05-01
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	128,900원
영어	PRINT	128,900원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

02.04 : 비철금속-니켈, 납, 주석, 귀금속, 일차금속 등

적용범위

1.1 This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

TABLE 1 Chemical Requirements


Element	Composition Limits, %
	UNS N07022	UNS N07208	UNS N07252 (Formerly Grade 689)	UNS N07001 (Formerly Grade 685)	UNS N07500 (Formerly Grade 684)	UNS N07750 (Formerly Grade 688)	UNS N07718 (Formerly Grade 718)
Carbon	0.010 max	0.04–0.08	0.10–0.20	0.03–0.10	0.15 max	0.08 max	0.08 max
Manganese	0.5 max	0.3 max	0.50 max	1.00 max	0.75 max	1.00 max	0.35 max
Silicon	0.08 max	0.15 max	0.50 max	0.75 max	0.75 max	0.50 max	0.35 max
Phosphorus	0.025 max	0.015 max	0.015 max	0.030 max	0.015 max	...	0.015 max
Sulfur	0.015 max	0.015 max	0.015 max	0.030 max	0.015 max	0.01 max	0.015 max
Chromium	20.0–21.4	18.5–20.5	18.00–20.00	18.00–21.00	15.00–20.00	14.00–17.00	17.0–21.0
Cobalt	1.0 max	9.0–11.0	9.00–11.00	12.00–15.00	13.00–20.00	1.00 max^A	1.0 max^A
Molybdenum	15.5–17.4	8.0–9.0	9.00–10.50	3.50–5.00	3.00–5.00	...	2.80–3.30
Columbium (Nb) + tantalum	...	...	...	...	...	0.70–1.20	4.75–5.50
Titanium	...	1.90–2.30	2.25–2.75	2.75–3.25	2.50–3.25	2.25–2.75	0.65–1.15
Aluminum	0.5 max	1.38–1.65	0.75–1.25	1.20–1.60	2.50–3.25	0.40–1.00	0.20–0.80
Zirconium	...	0.020 max	...	0.02–0.12	...	...	...
Boron	0.006 max	0.003–0.010	0.003–0.01	0.003–0.01	0.003–0.01	...	0.006 max
Iron	1.8 max	1.5 max	5.00 max	2.00 max	4.00 max	5.00–9.00	remainder^B
Copper	0.5 max	0.1 max	...	0.50 max	0.15 max	0.50 max	0.30 max
Nickel	remainder^B	remainder^B	remainder^B	remainder^B	remainder^B	70.00 min	50.0–55.0
Tantalum	0.2 max	0.1 max	...	...	...	...	...
Columbium (Niobium)	...	0.2 max	...	...	...	...	...
Tungsten	0.8 max	0.5 max	...	...	...	...	...
	UNS N07080 (Formerly Grade 80A)	UNS N07752	UNS N09925	UNS N07725
Carbon	0.10 max	0.020–0.060	0.03 max	0.03 max
Manganese	1.00 max	1.00 max	1.0 max	0.35 max
Silicon	1.00 max	0.50 max	0.5 max	0.20 max
Phosphorus	...	0.008 max	0.03 max	0.015 max
Sulfur	0.015 max	0.003 max	0.03 max	0.010 max
Chromium	18.00–21.00	14.50–17.00	19.5–22.5†	19.00–22.50†
Cobalt	...	0.050 max	...	...
Molybdenum	...	...	2.5–3.5	7.00–9.50
Columbium (Nb) + tantalum	...	0.70–1.20	0.5 max (Nb only)	2.75–4.00
Titanium	1.80–2.70	2.25–2.75	1.9–2.40	1.00–1.70
Aluminum	0.50–1.80	0.40–1.00	0.1–0.5	0.35 max
Boron	...	0.007 max	...	...
Iron	3.00 max	5.00–9.00	22.0 min	remainder^B
Copper	...	0.50 max	1.5–3.0	...
Zirconium	...	0.050 max	...	...
Vanadium	...	70.0 min	...	...
Nickel	remainder^B	70.0 min	42.0–46.0	55.0–59.0

^A If determined.

^B The element shall be determined arithmetically by difference.

† Chromium content was corrected editorially.

국제분류(ICS)코드

페이지수

Edition

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM B637-23	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2023-12-01	표준
2	ASTM B637-23 REDLINE	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2023-12-01	표준
3	ASTM B637-18	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2018-11-01	구판
4	ASTM B637-18 REDLINE	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2018-11-01	구판
5	ASTM B637-16	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2016-10-01	구판
6	ASTM B637-15	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2015-10-01	구판
7	ASTM B637-12e1	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2012-05-01	구판
8	ASTM B637-12	Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service	2012-05-01	구판
9	ASTM B637-06(2011)	Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service	2011-06-01	구판
10	ASTM B637-06e1	Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service	2006-12-01	구판
11	ASTM B637-06	Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service	2006-12-01	구판
12	ASTM B637-03	Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service	2003-06-10	구판
13	ASTM B637-98	Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service	1998-04-10	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

함께 구입한 상품이 존재하지 않습니다.
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM B637-12

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기