관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Nickel Alloy Forgings
| 분야 | 02.04 : 비철금속-니켈, 납, 주석, 귀금속, 일차금속 등 |
|---|---|
| 적용범위 | 1.1 This specification covers forgings of nickel alloy UNS N02200, Ni-Cu alloy UNS N04400, Ni-Cr-Fe alloys UNS N06600, UNS N06603, and UNS N06690, Ni-Cr-Mo-Nb alloy UNS N06625, Ni-Cr-Mo-Si alloy UNS N06219, low-carbon Ni-Mo-Cr alloys UNS N10276 and UNS N06022, Ni-Cr-Mo-W alloy UNS N06110, low-carbon Ni-Cr-Mo-W alloy UNS N06686, Ni-Fe-Cr-Mo-Cu alloy UNS N08825, Fe-Ni-Cr-Mo-N alloy UNS N08367, low-carbon Ni-Cr-Mo alloys UNS N06035, UNS N06058, and UNS N06059, low carbon Ni-Cr-Mo-Cu alloy UNS N06200, low-carbon Ni-Mo-Cr alloy UNS N10362, Ni-Mo-Cr-Fe alloy UNS N10242, Ni-Mo alloys UNS N10665 and UNS N10675, low-carbon Ni-Fe-Cr-Mo-Cu alloy UNS N08031, Ni-Cr-W-Mo alloy UNS N06230, Ni-Cr-Co-Mo alloy UNS N06617, Ni-Co-Cr-Si alloy UNS N12160, Ni-Fe-Cr alloys, Ni-Mo alloy UNS N10629, Ni-Cr-Fe-Al alloy UNS N06025, Ni-Cr-Fe-Si alloy UNS N06045, Low-Carbon Ni-Mo-Cr-Ta alloy UNS N06210, Ni-Mo-Cr-Fe alloy UNS N10624, and low-carbon Cr-Ni-Fe-N alloy UNS R20033*. 1.1.1 The nickel-iron-chromium alloys are UNS N08120, UNS N08800, UNS N08810, and UNS N08811. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, N08120, and UNS N08811 are normally employed in service temperatures above 1100°F where resistance to creep and rupture is required, and are annealed to develop controlled grain size for optimum properties in this temperature range. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | |
| 페이지수 | 11 |
| Edition | 10 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM B564-22 | Standard Specification for Nickel Alloy Forgings | 2022-04-01 | 표준 |
| 2 | ASTM B564-22 REDLINE | Standard Specification for Nickel Alloy Forgings | 2022-04-01 | 표준 |
| 3 | ASTM B564-19 | Standard Specification for Nickel Alloy Forgings | 2019-11-01 | 구판 |
| 4 | ASTM B564-19 REDLINE | Standard Specification for Nickel Alloy Forgings | 2019-11-01 | 구판 |
| 5 | ASTM B564-18 REDLINE | Standard Specification for Nickel Alloy Forgings | 2018-11-01 | 구판 |
| 6 | ASTM B564-18 | Standard Specification for Nickel Alloy Forgings | 2018-11-01 | 구판 |
| 7 | ASTM B564-17a | Standard Specification for Nickel Alloy Forgings | 2017-07-01 | 구판 |
| 8 | ASTM B564-17 | Standard Specification for Nickel Alloy Forgings | 2017-06-01 | 구판 |
| 9 | ASTM B564-15 | Standard Specification for Nickel Alloy Forgings | 2015-10-01 | 구판 |
| 10 | ASTM B564-11e1 | Standard Specification for Nickel Alloy Forgings | 2011-10-01 | 구판 |
| 11 | ASTM B564-11 | Standard Specification for Nickel Alloy Forgings | 2011-10-01 | 구판 |
| 12 | ASTM B564-10 | Standard Specification for Nickel Alloy Forgings | 2010-10-01 | 구판 |
| 13 | ASTM B564-06a | Standard Specification for Nickel Alloy Forgings | 2006-12-01 | 구판 |
| 14 | ASTM B564-06 | Standard Specification for Nickel Alloy Forgings | 2006-07-01 | 구판 |
| 15 | ASTM B564-04 | Standard Specification for Nickel Alloy Forgings | 2004-02-01 | 구판 |
| 16 | ASTM B564-00a | Standard Specification for Nickel Alloy Forgings | 2000-10-10 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
