관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
| 분야 | 08.01 : 플라스틱 (Ⅰ) |
|---|---|
| 적용범위 | 1.1 This test method describes a procedure for estimating the resistance of transparent plastics to one kind of surface abrasion by measurement of its optical effects. 1.2 Abrasive damage is judged by that percentage of transmitted light which, in passing through the abraded track, deviates from the incident beam by forward scattering. For the purpose of this test method, only light flux deviating more than 0.044 rad (2.5°) on the average is considered in this assessment of abrasive damage. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Note 1-Recent attempts to employ the Taber Abraser for volume loss determinations of various plastics, like earlier ones, have been unsuccessful because of excessively large coefficients of variation attributed to the data. Insufficient agreement among the participating laboratories has rendered the use of volume loss procedure inadvisable as an ASTM test method. Note 2-For determining resistance to abrasion of plastics by measurement of volume loss, reference should be made to Test Methods D1242. Note 3-For determining the resistance to abrasion of organic coatings by weight loss, reference is made to Test Method D4060. This test uses more aggressive CS-10 or CS-17 abrasive wheels. It suffers from poor reproducibility between laboratories when numerical abrasion resistance values are used. Interlaboratory agreement improves significantly when ranking a series of coatings for their abrasion resistance. Note 4-This test method is similar to ISO 3444, and ISO 4586/2. Their technical content is somewhat different.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see 7.1.2. |
| 국제분류(ICS)코드 | |
| 페이지수 | 5 |
| Edition | 99 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D1044-24 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser | 2024-06-01 | 표준 |
| 2 | ASTM D1044-24 REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser | 2024-06-01 | 표준 |
| 3 | ASTM D1044-19 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser | 2019-09-01 | 구판 |
| 4 | ASTM D1044-19 REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser | 2019-09-01 | 구판 |
| 5 | ASTM D1044-13 REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 2013-09-01 | 구판 |
| 6 | ASTM D1044-13 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 2013-09-01 | 구판 |
| 7 | ASTM D1044-08e1 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 2008-03-01 | 구판 |
| 8 | ASTM D1044-08 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 2008-03-01 | 구판 |
| 9 | ASTM D1044-05 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 2005-11-01 | 구판 |
| 10 | ASTM D1044-99 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion | 1999-07-10 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
