관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
| 분야 | 01.09 : 비철화스너 (구름요소베어링) |
|---|---|
| 적용범위 | 1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. (6.35 mm) through 4 in. (104 mm). The fasteners are designated by "Grade" denoting tensile strength and intended use, as follows: Grade Description Grade A Bolts and studs having a minimum tensile strength of 60 ksi (414 MPa) and intended for general applications, Grade B Bolts and studs having a tensile strength of 60 to 100 ksi (414 to 690 MPa) and intended for flanged joints in piping systems with cast iron flanges, and Grade C Nonheaded anchor bolts, either bent or straight, having properties conforming to Specification A 36 (tensile strength of 58 to 80 ksi (400 to 550 MPa)) and intended for structural anchorage purposes.1.1.1 The term studs includes stud stock, sometimes referred to as threaded rod . 1.2 This specification does not cover requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors or similar externally threaded fasteners. 1.3 Suitable nuts are covered in Specification A563. Unless otherwise specified, the grade and style of nut for each grade of fastener, of all surface finishes, shall be as follows: Fastener Grade and Size Nut Grade and Style A A, C, 1/4 to 1 1/2 in. A, hex A, C, over 1 1/2 to 4 in. A, heavy hex B, 1/4 to 4 in. A, heavy hex A Nuts of other grades and styles having specified proof load stresses (Specification A 563, Table 3) greater than the specified grade and style of nut are also suitable.1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 Supplementary Requirement S1 of an optional nature is provided, which describes additional restrictions to be applied when bolts are to be welded. It shall apply only when specified in the inquiry, order, and contract. |
| 국제분류(ICS)코드 | |
| 페이지수 | 6 |
| Edition | 00 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A307-21 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength | 2021-02-15 | 표준 |
| 2 | ASTM A307-21 REDLINE | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength | 2021-02-15 | 표준 |
| 3 | ASTM A307-14e1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength | 2014-10-01 | 구판 |
| 4 | ASTM A307-14 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength | 2014-10-01 | 구판 |
| 5 | ASTM A307-12 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength | 2012-12-01 | 구판 |
| 6 | ASTM A307-10 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2010-10-01 | 구판 |
| 7 | ASTM A307-07b | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2007-12-01 | 구판 |
| 8 | ASTM A307-07a | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2007-08-01 | 구판 |
| 9 | ASTM A307-07 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2007-06-15 | 구판 |
| 10 | ASTM A307-04e1 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2004-08-01 | 구판 |
| 11 | ASTM A307-04 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2004-08-01 | 구판 |
| 12 | ASTM A307-03 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2003-10-01 | 구판 |
| 13 | ASTM A307-02 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2002-10-10 | 구판 |
| 14 | ASTM A307-00 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength | 2000-05-10 | 구판 |
| 15 | ASTM A307-97 | Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strangth | 구판 | |
| 16 | ASTM A307-78 | Standard Specification for Carbon Steel Externally Threaded Standard Fasteners | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
