관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements
| 분야 | ISO/TC 127/SC 2 : Safety, ergonomics and general requirements |
|---|---|
| 적용범위 | This document provides a methodology for the determination of performance levels required for earth moving machinery (EMM) as defined in ISO 6165. A Machine Control System Safety Analysis (MCSSA) determines the amount of risk reduction of hazards associated with control systems, required for Safety Control Systems (SCS). This reduction is quantified by the Machine Performance Level (MPL), the hazards are identified using the risk assessment principles as defined in ISO 12100 or by other means. NOTE 1 Step 2 as shown in Annex A demonstrates the relationship between ISO 12100 and ISO 19014 as a complementary protective measure. NOTE 2 ISO 19014 can also be used to assess the functional safety requirements of other off-road mobile machinery. For those controls determined to be safety-related, the characteristics for architecture, hardware, software environmental requirements and performance are covered by other parts in ISO 19014. ISO 19014 covers the hazards caused by the failure of a safety control system and excludes hazards arising from the equipment itself (for example, electric shock, fire, etc.). Other controls that are not safety control systems (SCS), that do not mitigate a hazard or perform a control function and where the operator would be aware of a failure, are excluded from this standard (e.g. windscreen wipers, head lights, cab light, etc.). NOTE 3 A list of safety control systems is included in Annex D. NOTE 4 Audible warnings are excluded from the requirements of diagnostic coverage. |
| 국제분류(ICS)코드 | 53.100 : 토공기계 |
| 페이지수 | 20 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19014-1:2018 | Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements | 2018-06-26 | 표준 |
| 2 | ISO/DIS 19014-1 | Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements | 초안 |
ISO/DIS 19014-2 - Earth-moving machinery — Functional safety — Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system 상세보기
ISO/DIS 19014-5 - Earth-moving machinery — Functional safety — Part 5: Tables of performance levels 상세보기
ISO/DIS 19014-4 - Earth-moving machinery — Functional safety — Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system 상세보기
ISO/DIS 19014-1 - Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements 상세보기
ISO/DIS 19014-3 - Earth-moving machinery — Functional safety — Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system 상세보기
ISO 19014-3:2018 - Earth-moving machinery — Functional safety — Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system 상세보기
ISO 19014-2:2022 - Earth-moving machinery — Functional safety — Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system 상세보기
ISO/TS 19014-5:2021 - Earth-moving machinery — Functional safety — Part 5: Tables of performance levels 상세보기
ASTM F3244-17 - Standard Test Method for Navigation: Defined Area 상세보기
ISO 8643:2017 - Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
