관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering
| 분야 | ISO/TC 17/SC 4 : Heat treatable and alloy steels |
|---|---|
| 적용범위 | ISO 683-2:2016 specifies the technical delivery requirements for - semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1), - bars (see Note 1), - wire rod, finished flat products, and - hammer or drop forgings (see Note 1) manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2. The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9). The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8. NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 2 For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition. NOTE 3 For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography. NOTE 4 ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954. In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B). In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable. |
| 국제분류(ICS)코드 |
77.140.20 : 고품질 강
77.140.45 : 비합금 철 77.140.10 : 열처리용 강 |
| 페이지수 | 40 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 683-2:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering | 2016-06-29 | 표준 |
| 2 | ISO 683-2:2012 | Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering | 2012-09-20 | 구판 |
ISO 683-12:1972 - Heat-treated steels, alloy steels and free-cutting steels -- Part 12: Flame and induction hardening steels 상세보기
ISO 683-16:1976 - Heat-treated steels, alloy steels and free-cutting steels -- Part 16: Precipitation hardening stainless steels 상세보기
ISO 683-13:1986 - Heat-treatable steels, alloy steels and free-cutting steels -- Part 13: Wrought stainless steels 상세보기
ISO 683-10:1987 - Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels 상세보기
ISO 683-9:1988 - Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels 상세보기
ISO 9934-1:2016 - Non-destructive testing — Magnetic particle testing — Part 1: General principles 상세보기
ISO 683-3:2022 - Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels 상세보기
ISO 6892-1:2019 - Metallic materials — Tensile testing — Part 1: Method of test at room temperature 상세보기
ASTM E1444/E1444M-22a - Standard Practice for Magnetic Particle Testing for Aerospace 상세보기
BS EN 10228-1:2016 - Non-destructive testing of steel forgings. Magnetic particle inspection. 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
