관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines
| 분야 | ISO/TC 39/SC 4 : Woodworking machines |
|---|---|
| 적용범위 | ISO 19085-4:2018 gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as "machines". NOTE 1 In manual loading, the operator puts the work-piece directly onto the work-piece support, with no intermediate loading device to receive and transfer the work-piece from the operator to the cutting position. In manual unloading, the operator removes the work-piece directly from the work-piece support, with no intermediate unloading device to transfer the work-piece from the cutting position to the operator. ISO 19085-4:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. ISO 19085-4:2018 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: - an integrated feed device; - a device for scoring; - an angle cutting device; - a middle support device; - programmable end stops for parallel vertical cuts; - a device for grooving with a width of at most 20 mm in one pass by using a milling tool; and - a panel pusher. The machines are designed for cutting panels consisting of: a) solid wood; b) material with similar physical characteristics to wood (see ISO 19085‑1:2017, 3.2); c) composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy; d) polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; and e) gypsum boards, gypsum bounded fibreboards. ISO 19085-4:2018 does not apply to machines - with pressure beam and saw unit mounted behind the work-piece support; - where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel; - designed to cut in vertical direction only; - which are displaceable; - automatically performing two or more cutting cycles in sequence; - intended for use in potentially explosive atmosphere; and - manufactured before the date of its publication. |
| 국제분류(ICS)코드 |
13.110 : 기계 안전성
79.120.10 : 목공 기계 |
| 페이지수 | 30 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19085-4:2024 | Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines | 2024-07-23 | 표준 |
| 2 | ISO 19085-4:2018 | Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines | 2018-03-15 | 구판 |
ISO/FDIS 19085-15 - Woodworking machines — Safety — Part 15: Presses 상세보기
ISO/DIS 19085-13 - Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading 상세보기
ISO/DIS 19085-20 - Woodworking machines — Safety — Part 20: Horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) 상세보기
ISO/DIS 19085-21 - Woodworking machines — Safety — Part 21: Double blade circular sawing machines for cross-cutting with integrated feed 상세보기
ISO/DIS 19085-22 - Woodworking machines — Safety — Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines 상세보기
ISO 19085-11:2020 - Woodworking machines — Safety — Part 11: Combined machines 상세보기
ISO 19085-9:2019 - Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table) 상세보기
ISO 19085-5:2017 - Woodworking machines — Safety — Part 5: Dimension saws 상세보기
IEC 61000-4-3:2020 - Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test 상세보기
IEC 61000-4-5:2014+AMD1:2017 CSV - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
