관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
| 분야 | ISO/TC 92/SC 2 : Fire containment |
|---|---|
| 적용범위 | ISO 834-10:2014 specifies a method for testing fire protection systems applied to structural steel members used in buildings as beams, columns, or tension members. It is intended for use in conjunction with the assessment protocol described in ISO 834‑11. It applies to steel sections (including hollow sections) and only considers sections without openings in the web. Results from analysis of I or H sections are directly applicable to angles, channels, and T-sections for the same section factor, whether used as individual members, e.g. bracing, or part of a fabricated structural system such as a steel truss construction. ISO 834-10:2014 does not apply to solid bar, rod, or concrete-filled hollow sections. ISO 834-10:2014 describes the fire test procedures that specify the tests which should be carried out to determine the ability of the fire protection system to remain sufficiently coherent and in position for a well-defined range of deformations, furnace, and steel temperatures, such that the efficacy of the fire protection system is not significantly impaired, and to provide data on the thermal characteristics of the fire protection system when exposed to the standard temperature/time curve specified in ISO 834‑1. In special circumstances, where specified in National Building Regulations, there can be a requirement to subject reactive fire protection materials to a smouldering curve. The test and the requirements for its use are described in ISO 834-10:2014 (Annex G). ISO 834-10:2014 is applicable to both passive and reactive fire protection systems as defined in the terms and definitions, which are installed or applied in such a way that they remain in place for the intended duration of fire exposure. The fire test methodology makes provision for the collection and presentation of data which is then used as direct input into ISO 834‑11 to determine the limits of direct application to steel sections of various shapes, sizes, and fire resistance periods. |
| 국제분류(ICS)코드 | 13.220.50 : 건물자재 및 요소의 내화성 |
| 페이지수 | 61 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 834-10:2014 | Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements | 2014-02-10 | 표준 |
ISO/DIS 834-1 - Fire-resistance tests — Elements of building construction — Part 1: General requirements 상세보기
ISO/DIS 834-7 - Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns 상세보기
ISO 834-1:1999 - Fire-resistance tests -- Elements of building construction -- Part 1: General requirements 상세보기
ISO 834-4:2000 - Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements 상세보기
ISO 834-5:2000 - Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements 상세보기
ISO 834-5:2000 - Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements 상세보기
ISO 834-6:2000 - Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams 상세보기
ISO 834-7:2000 - Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns 상세보기
ISO 834-9:2003 - Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements 상세보기
ISO 834-2:2019 - Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
