한국표준정보망(KSSN)

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

표준 판매

ISO 4498:2010

Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness

- 발행일 : 2010-06-09
- 발행기관 : ISO

언어	제공형태	판매가격	선택
영어	PDF	100,300원
영어	PRINT	100,300원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야	ISO/TC 119/SC 3 : Sampling and testing methods for sintered metal materials (excluding hardmetals)
적용범위	ISO 4498:2010 specifies methods of hardness testing of sintered metal materials, excluding hardmetals. Procedure 1 determines the apparent hardness of the whole material. Procedure 1 applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface, applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface, therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, by carburizing, carbonitriding, nitrocarburizing or sulphidizing), and applies to materials which have been induction hardened. Procedure 2 determines the microhardness of the metal phase. Procedure 2 applies to all types of sintered metal materials, is used, in particular, to determine the hardness profile of case‑hardened or carbonitrided materials in accordance with the method described in ISO 4507, and also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.
국제분류(ICS)코드	77.040.10 : 금속의 기계적 시험 77.160 : 동력 금속학
페이지수	12
Edition	2

이력정보

No.	표준번호	표준명	발행일	상태
1	ISO 4498:2010	Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness	2010-06-09	표준
2	ISO 4498:2005	Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness	2005-06-13	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ISO 2768-1:1989 - General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications 상세보기

ISO 2768-2:1989 - General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications 상세보기

ISO 2738:1999 - Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity 상세보기

ISO 3369:2006 - Impermeable sintered metal materials and hardmetals — Determination of density 상세보기

ASTM F2267-04(2018) - Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ISO 4498:2010

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기