관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Radiological protection — Sealed radioactive sources — General requirements and classification
| 분야 | ISO/TC 85/SC 2 : Radiological protection |
|---|---|
| 적용범위 | ISO 2919:2012 establishes a classification system for sealed radioactive sources that is based on test performance and specifies general requirements, performance tests, production tests, marking and certification. It provides a set of tests by which manufacturers of sealed radioactive sources can evaluate the safety of their products in use and users of such sources can select types which are suitable for the required application, especially where protection against the release of radioactive material, with consequent exposure to ionizing radiation, is concerned. ISO 2919:2012 can also serve as guidance to regulating authorities. The tests fall into several groups, including, for example, exposure to abnormally high and low temperatures and a variety of mechanical tests. Each test can be applied in several degrees of severity. The criterion of pass or fail depends on leakage of the contents of the sealed radioactive source. Although ISO 2919:2012 classifies sealed sources by a variety of tests, it does not imply that a sealed source will maintain its integrity if used continuously at the rated classification. For example, a sealed source tested for 1 h at 600 °C might, or might not, maintain its integrity if used continuously at 600 °C. A list of the main typical applications of sealed radioactive sources, with a suggested test schedule for each application, is given in Table 3. The tests constitute minimum requirements corresponding to the applications in the broadest sense. Factors to be considered for applications in especially severe conditions are listed in 4.2. ISO 2919:2012 makes no attempt to classify the design of sources, their method of construction or their calibration in terms of the radiation emitted. Radioactive materials inside a nuclear reactor, including sealed sources and fuel elements, are not covered by ISO 2919:2012. |
| 국제분류(ICS)코드 | 13.280 : 방사능 보호 |
| 페이지수 | 19 |
| Edition | 3 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 2919:2012 | Radiological protection — Sealed radioactive sources — General requirements and classification | 2012-02-14 | 표준 |
| 2 | ISO 2919:1999 | Radiation protection -- Sealed radioactive sources -- General requirements and classification | 1999-02-18 | 구판 |
| 3 | ISO 2919:1980 | Sealed radioactive sources — Classification | 1980-05-01 | 구판 |
관련상품이 존재하지 않습니다.
ISO 8194:1987 - Radiation protection — Clothing for protection against radioactive contamination — Design, selection, testing and use 상세보기
ISO 20553:2006 - Radiation protection — Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material 상세보기
ISO 6962:2004 - Nuclear energy — Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste 상세보기
ISO 12807:2018 - Safe transport of radioactive materials — Leakage testing on packages 상세보기
ISO 17874-1:2010 - Remote handling devices for radioactive materials — Part 1: General requirements 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
