관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour
| 분야 | ISO/TC 108/SC 2 : Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures |
|---|---|
| 적용범위 | ISO 21940-12:2016 presents typical configurations of rotors with flexible behaviour in accordance with their characteristics and balancing requirements, describes balancing procedures, specifies methods of assessment of the final state of balance, and establishes guidelines for balance quality criteria. ISO 21940-12:2016 can also serve as a basis for more involved investigations, e.g. when a more exact determination of the required balance quality is necessary. If due regard is paid to the specified methods of manufacture and balance tolerances, satisfactory running conditions can be expected. ISO 21940-12:2016 is not intended to serve as an acceptance specification for any rotor, but rather to give indications of how to avoid gross deficiencies and unnecessarily restrictive requirements. Structural resonances and modifications thereof lie outside the scope of this part of ISO 21940. The methods and criteria given are the result of experience with general industrial machinery. It is possible that they are not directly applicable to specialized equipment or to special circumstances. Therefore, in some cases, deviations from this part of ISO 21940 are possible. |
| 국제분류(ICS)코드 | 21.120.40 : 평형 및 균형 시험기 |
| 페이지수 | 33 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 21940-12:2016 | Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour | 2016-03-29 | 표준 |
ISO 21940-13:2012 - Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors 상세보기
ISO 21940-32:2012 - Mechanical vibration — Rotor balancing — Part 32: Shaft and fitment key convention 상세보기
ISO 21940-23:2012 - Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines 상세보기
ISO 21940-14:2012 - Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors 상세보기
ISO 21940-31:2013 - Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines to unbalance 상세보기
ISO 21940-13:2012 - Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors 상세보기
ISO 21940-11:2016 - Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour 상세보기
ISO 21940-23:2012 - Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines 상세보기
ISO 21940-2:2017 - Mechanical vibration — Rotor balancing — Part 2: Vocabulary 상세보기
ISO 21940-1:2019 - Mechanical vibration — Rotor balancing — Part 1: Introduction 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
