관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | ISO/TC 142 : Cleaning equipment for air and other gases |
---|---|
적용범위 | ISO 29462:2013 describes a procedure for measuring the performance of general ventilation air cleaning devices in their end use installed configuration. The performance measurements include removal efficiency by particle size and the resistance to airflow. The procedures for test include the definition and reporting of the system airflow. The procedure describes a method of counting ambient air particles of 0,3 μm to 5,0 μm upstream and downstream of the in-place air cleaner(s) in a functioning air handling system. The procedure describes the reduction of particle counter data to calculate removal efficiency by particle size. Since filter installations vary dramatically in design and shape, a protocol for evaluating the suitability of a site for filter evaluation and for system evaluation is included. When the evaluated site conditions meet the minimum criteria established for system evaluation, the performance evaluation of the system can also be performed according to this procedure. ISO 29462:2013 also describes performance specifications for the testing equipment and defines procedures for calculating and reporting the results. This International Standard is not intended for measuring performance of portable or movable room air cleaners or for evaluation of filter installations with and expected filtration efficiency at or above 99 % or at or below 30 % when measured at 0,4 μm. |
국제분류(ICS)코드 | 91.140.30 : 통풍 및 공기 조절체계 |
페이지수 | 45 |
Edition | 1 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ISO 29462:2022 | Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow | 2022-07-29 | 표준 |
2 | ISO 29462:2013 | Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow | 2013-03-13 | 구판 |
관련상품이 존재하지 않습니다.
ISO 15957:2015 - Test dusts for evaluating air cleaning equipment 상세보기
ISO 16170:2016 - In situ test methods for high efficiency filter systems in industrial facilities 상세보기
ISO 16494:2014 - Heat recovery ventilators and energy recovery ventilators — Method of test for performance 상세보기
ISO 10121-1:2014 - Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media 상세보기
ISO 21501-1:2009 - Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기