관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)
| 분야 | ISO/TC 39/SC 2 : Test conditions for metal cutting machine tools |
|---|---|
| 적용범위 | This part of ISO 10791 specifies, with reference to ISO 230-1, the geometric tests for machining centres (or numerically controlled milling machines, boring machines, etc., where applicable) with integral indexable or continuous universal heads (vertical Z-axis). This part of ISO 10791 applies to machining centres having basically six numerically controlled axes, of which three are linear (X, Y and Z) up to 2 000 mm in length, and three are rotary (A or D and B on the head, and C' on the table). Movements other than those mentioned are considered as special features and the relevant tests are not included in this part of ISO 10791. This part of ISO 10791 describes geometric tests for three possible types of accessory universal heads, in the annexes: — annex A: Integral universal 45° split indexable heads (B and D axes), with mechanical indexing of the different angular positions of the two bodies (e.g. Hirth couplings): the relevant tests (AG1 to AG9) check only the resulting position of the spindle; — annex B: Integral universal swivel heads (B and A axes), with two numerically controlled rotary axes perpendicular to each other (tests BG1 to BG7); — annex C: Integral universal 45° split continuous heads (B and D axes), similar to the first type but provided with continuous positioning of the two numerically controlled rotary axes: the relevant tests (CG1 to CG7) check all the geometric features (planes and axes) which contribute to the resulting position of the spindle, excluding the positioning accuracy of the two rotary axes; these tests can also be used for a deeper investigation on the 45° indexable heads, if their movements and locks allow this. This part of ISO 10791 deals only with the verification of accuracy of the machine and does not apply to the testing of the machine operation, which should generally be checked separately. Certain tests concerning the performance of the machine operating under no-load or finishing conditions are included in other parts of ISO 10791. |
| 국제분류(ICS)코드 | 25.040.10 : 복합 공작 기계 |
| 페이지수 | 48 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 10791-3:1998/Cor 1:1999 | 1999-11-11 | 표준 | |
| 2 | ISO 10791-3:1998 | Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis) | 1998-12-20 | 표준 |
ISO 10791-5:1998 - Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets 상세보기
ISO 10791-4:1998 - Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes 상세보기
ISO 10791-3:1998/Cor 1:1999 - 상세보기
ISO 10791-9:2001 - Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change 상세보기
ISO 10791-8:2001 - Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes 상세보기
KS B ISO 10791-10 - 머시닝센터 시험 조건 —제10부: 열변형 평가 상세보기
KS B ISO 10791-9 - 머시닝센터 시험 조건 —제9부: 공구 교환 및 팰릿 교환 작동 시간의 평가 상세보기
KS B ISO 10791-3 - 머시닝센터 시험 조건 — 제3부: 일체형 분할 또는 연속 만능 헤드를 가진 기계(수직 Z축)의 기하학적 정확정밀도 시험 상세보기
KS B ISO 10791-1 - 머시닝센터 시험 조건 — 제1부: 수평 스핀들(수평 Z축)을 가진 기계에 대한 기하학적 정확정밀도 시험 상세보기
ISO 10791-1:2015 - Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
