관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
초안
판매
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing/ rotation motion
| 분야 | ISO/TC 127/SC 2 : Safety, ergonomics and general requirements |
|---|---|
| 적용범위 | This document defines requirements for collision warning systems (CWS) and collision avoidance systems (CAS) that address swing/rotation motion for: — earth moving machinery as defined in ISO 6165; — mobile underground mining machinery as defined in ISO 19296; and — road construction machinery as defined in ISO 22242. This document covers intended object between the ground plane of the machine and the top of the machine operator cabin. Thus this document does not cover the risk of collision with parts of the intended objects that are higher than the top of the machine operator cabin. This document does not consider machine height of working tool (e.g. hight of boom and arm). This document covers collision avoidance by motion inhibition prior to initiation of rotational motion; it does not cover avoidance by automatic application of the braking or inhibit or automatic manoeuvring (e.g. raise bucket) away from the intended object. It also covers collision warning and avoidance for machine movement caused by the swing/rotation of a machine or parts of a machine. There are two factors that increase the collision risk level (CRL) of a stationary rotation machine and this document deals with those cases: — when there is a risk of collision due to the presence of a stationary intended object before the start of machine rotation, and/or — when the intended object itself moves and comes towards the machine before the start of the motion and increases the risk of collision. Therefore, this document describes two types of collision risk levels (CRL): "rotation angle with stationary intended object" and "distance between the stationary machine and the moving intended object". The system described in this standard is intended to assist the operator of the machine. The responsibility for safe operation of the machine remains with the machine operator. This document is not applicable to collision warning and collision avoidance systems installed/manufactured before the date of its publication. |
| 국제분류(ICS)코드 | 53.100 : 토공기계 |
| 페이지수 | 25 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO/DIS 21815-4 | Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing/ rotation motion | 초안 |
ISO/TS 21815-2:2021 - Earth-moving machinery — Collision warning and avoidance — Part 2: On-board J1939 communication interface 상세보기
ISO 21815-1:2022 - Earth-moving machinery — Collision warning and avoidance — Part 1: General requirements 상세보기
ISO 21815-3:2023 - Earth-moving machinery — Collision warning and avoidance — Part 3: Risk area and risk level for forward/reverse motion 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
