관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Ceramic tiles — Installation — Part 3: Installation of large format porcelain tiles and panels by mechanical means onto a supporting structure
| 분야 | ISO/TC 189 : Ceramic tile |
|---|---|
| 적용범위 | Classes A1a and B1a porcelain (as defined in ISO 13006) are now manufactured in much larger formats than previously available and are increasingly being used as an external cladding material for buildings. Classes A1b, A11a, and AIIb extruded ceramics (as defined in ISO 13006) are not covered by the scope of this document. These materials, when specifically developed for external façade applications, have been used extensively for many years and established methodologies already exist. Large format porcelain tiles or panels are generally considered to be too large to be used externally on high buildings when installed by conventional adhesive fixing methods (ISO/TR 17870-1 and ISO/TR 17870-2); therefore, mechanical fixings are used. As there are currently no published standards or guidelines for these products to be installed in this way, this document provides generic information on some typical types of mechanical fixing systems in use together with positive and negative wind load factors and typical testing procedures that can be used for evaluating anchor pull-out or edge fracture resistance. Also, because the current impact resistance test method for ceramics tiles (ISO 10545-5) relates only to traditional (bedded) installed tiling – which measures the coefficient of restitution – it is not an appropriate test for unbedded (unsupported) tiles, so alternative test methods (ISO 7892) are referred to for measuring hard-body and soft-body impact resistance. Guidance is provided regarding typical impact zones of vulnerability to hard and soft body impact and reference is made to anti-shatter mesh backings, which are sometimes applied to porcelain cladding tiles and panels. Installation systems which rely upon the chemical adhesion of metal brackets, straps or framing, etc. onto or into large format porcelain tiles or panels in conjunction with, or instead of, mechanical attachment, are not included in this document. The detailed principles for the design and construction of the substructure of ventilated façades, also known as rain screens, used on the outside of buildings, are well documented in other national and international standards and are not therefore, included in this document, other than in general reference. |
| 국제분류(ICS)코드 | 91.100.23 : 세라믹 타일 |
| 페이지수 | 26 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO/TS 17870-3:2023 | Ceramic tiles — Installation — Part 3: Installation of large format porcelain tiles and panels by mechanical means onto a supporting structure | 2023-01-10 | 표준 |
ISO/TR 17870-1:2015 - Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles 상세보기
ISO/TR 17870-2:2015 - Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels 상세보기
ISO 13007-5:2015 - Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives 상세보기
ISO 14448:2016 - Low modulus adhesives for exterior tile finishing 상세보기
ISO 10545-12:1995/Cor 1:1997 - 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
