한국표준정보망(KSSN)

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables

미리보기

언어	제공형태	판매가격	선택
영어	PDF	66,900원
영어	PRINT	66,900원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

분야	ISO/TC 44/SC 10 : Quality management in the field of welding
적용범위	This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service. This document is limited to: — parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2); — fillet welds with throat thickness a ≥ 1 mm. This document is not applicable when any of the following is specified for the welded joint: a) hardness; b) impact properties; c) preheating; d) controlled heat input; e) interpass temperature; f) post-weld heat treatment. The use of this document can also be restricted by an application standard, specification or other documents.
국제분류(ICS)코드	25.160.10 : 용접 및 용접공의 자질
페이지수	6
Edition	2

No.	표준번호	표준명	발행일	상태
1	ISO 15610:2024	Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables	2024-03-06	표준
2	ISO 15610:2023	Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables	2023-02-10	구판
3	ISO 15610:2003	Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables	2003-10-09	구판