관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods
| 분야 | ISO/TC 23/SC 18 : Irrigation and drainage equipment and systems |
|---|---|
| 적용범위 | This document specifies the conditions and methods used for testing and characterizing the water distribution patterns of irrigation sprinklers. The term sprinkler is used in this document in a broad generic sense and is meant to cover a wide variety of products. The specific performance measurements addressed include distribution uniformity, wetted radius, and water jet trajectory height. This document applies to all irrigation sprinkler classifications for which those three performance measurements are required to verify the design objectives as defined by the manufacturer. This document deals both with indoor and outdoor tests and with radial and full grid tests. It is organized so as to deal with conditions common to all tests first and then with conditions unique to indoor testing only and finally with conditions unique to outdoor testing only. For any given sprinkler, a wide range of nozzle configurations, operating conditions, and adjustments generate at least a theoretical need for a correspondingly large number of tests. Testing agencies and manufacturers can use interpolation techniques to reduce the number of actual test runs provided accuracy standards are still being met. This document does not address the specific performance testing required for sprinklers intended for use in frost protection. This document does not address the topic of drop spectrum measurement and characterization and the related questions of soil compaction, spray drift, evaporative losses, etc., all of which can be considerations in the design of sprinkler irrigation systems. This document is used for evaluating irrigation coverage of sprinklers that are identical and arranged in a fixed repeating geometric pattern. This document does not apply to moving systems. This document applies to part-circle sprinklers provided that the testing agency can satisfy questions of potential anomalies in performance parameters. NOTE Annex A addresses the procedures for the characterization of sprinkler pattern uniformity. Annex B addresses testing part-circle sprinklers. |
| 국제분류(ICS)코드 | 65.060.35 : 관개장비 |
| 페이지수 | 21 |
| Edition | 3 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 15886-3:2021 | Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods | 2021-03-12 | 표준 |
| 2 | ISO 15886-3:2012/Amd 1:2016 | Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods — Amendment 1 | 2016-08-19 | 구판 |
| 3 | ISO 15886-3:2012 | Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods | 2012-09-03 | 구판 |
| 4 | ISO 15886-3:2004 | Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods | 2004-11-08 | 구판 |
ISO 15886-1:2012 - Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification 상세보기
ISO 15886-4:2019 - Irrigation equipment — Irrigation sprinklers — Part 4: Test methods for durability 상세보기
ISO 15886-2:2021 - Agricultural irrigation equipment — Sprinklers — Part 2: Design and operation requirements 상세보기
ISO 8909-1:2021 - Equipment for harvesting — Forage harvesters — Part 1: Vocabulary 상세보기
ISO 15886-2:2021 - Agricultural irrigation equipment — Sprinklers — Part 2: Design and operation requirements 상세보기
ISO 12003-2:2021 - Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 2: Rear-mounted ROPS 상세보기
ISO 12003-1:2021 - Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 1: Front-mounted ROPS 상세보기
ISO 15886-4:2019 - Irrigation equipment — Irrigation sprinklers — Part 4: Test methods for durability 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
