관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Road vehicles — Vehicle to grid communication interface — Part 9: Physical and data link layer conformance test for wireless communication
| 분야 | ISO/TC 22/SC 31 : Data communication |
|---|---|
| 적용범위 | This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 15118‑8 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118‑8 and against what the implementer states the SUT implementation's capabilities are. The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118‑8. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 15118‑8 and within the capabilities of the SUT (see NOTE below). A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2). In terms of coverage, this document only covers normative sections and requirements in ISO 15118‑8. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 15118‑8. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118‑8. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 15118‑8. The power flow between the EVSE and the EV is not considered. NOTE Practical limitations make it impossible to define an exhaustive test suite, and economic considerations can restrict testing even further. Hence, the purpose of this document is to increase the probability that different implementations are able to interwork. This is achieved by verifying them by means of a protocol test suite, thereby increasing the confidence that each implementation conforms to the protocol specification. However, the specified protocol test suite cannot guarantee conformance to the specification since it detects errors rather than their absence. Thus, conformance to a test suite alone cannot guarantee interworking. Instead, it gives confidence that an implementation has the required capabilities and that its behaviour conforms consistently in representative instances of communication. |
| 국제분류(ICS)코드 | 43.120 : 전기차 및 부분품 |
| 페이지수 | 72 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 15118-9:2022 | Road vehicles — Vehicle to grid communication interface — Part 9: Physical and data link layer conformance test for wireless communication | 2022-11-24 | 표준 |
ISO/DIS 15118-6 - Road vehicles — Vehicle to grid communication interface — Part 6: General information and use-case definition for wireless communication 상세보기
ISO/DIS 15118-4 - Road vehicles — Vehicle to grid communication interface — Part 4: Network and application protocol conformance test 상세보기
ISO/FDIS 15118-21 - Road vehicles — Vehicle to grid communication interface — Part 21: Common 2nd generation network layer and application layer requirements conformance test plan 상세보기
ISO/DIS 15118-2 - Road vehicles — Vehicle-to-grid communication interface — Part 2: Network and application protocol requirements 상세보기
ISO/FDIS 15118-10 - Road vehicles — Vehicle to grid communication interface — Part 10: Physical layer and data link layer requirements for single-pair Ethernet 상세보기
IEC 63119-2:2022 - Information exchange for electric vehicle charging roaming service - Part 2: Use cases 상세보기
ISO 15118-4:2018 - Road vehicles — Vehicle to grid communication interface — Part 4: Network and application protocol conformance test 상세보기
ISO 15118-8:2020 - Road vehicles — Vehicle to grid communication interface — Part 8: Physical layer and data link layer requirements for wireless communication 상세보기
IEC TS 61851-3-4:2023 - Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication 상세보기
IEC 62196-6:2022 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
