관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
| 분야 | ISO/TC 172/SC 1 : Fundamental standards |
|---|---|
| 적용범위 | This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of polished optics. This document describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form. The control of the surface form specified in ISO 10110-5, ISO 10110-12, and ISO 10110-19 is not specified in this document. |
| 국제분류(ICS)코드 |
37.020 : 광학기기
01.100.20 : 도안에 대한 특정 요소의 관습적 표현 |
| 페이지수 | 23 |
| Edition | 3 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 10110-8:2019 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture | 2019-11-15 | 표준 |
| 2 | ISO 10110-8:2010 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness | 2010-09-16 | 구판 |
| 3 | ISO 10110-8:1997 | Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture | 1997-10-23 | 구판 |
ISO/DIS 10110-6 - Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring and tilt tolerances 상세보기
ISO/DIS 10110-11 - Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data 상세보기
ISO 10110-2:1996 - Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence 상세보기
ISO 10110-3:1996 - Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions 상세보기
ISO 10110-4:1997 - Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae 상세보기
ISO 12123:2018 - Optics and photonics — Specification of raw optical glass 상세보기
ISO 10936-1:2017 - Optics and photonics — Operation microscopes — Part 1: Requirements and test methods 상세보기
ISO 10110-7:2017 - Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections 상세보기
ISO 9849:2017 - Optics and optical instruments — Geodetic and surveying instruments — Vocabulary 상세보기
ISO 8600-3:2019 - Endoscopes — Medical endoscopes and endotherapy devices — Part 3: Determination of field of view and direction of view of endoscopes with optics 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
