관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Woodworking machines — Safety — Part 14: Four-sided moulding machines
| 분야 | ISO/TC 39/SC 4 : Woodworking machines |
|---|---|
| 적용범위 | This document gives the safety requirements and measures for four-sided moulding machines, capable of continuous production use, with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, hereinafter referred to as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2). It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with: — universal spindle; — glass bead saw unit; — fixed or movable workpiece support; — quick tool changing system; — laser marking unit; — automatic workpiece returner; — in-feed hopper; — loading magazine; — unloading table. This document does not deal with any hazards related to: a) in-feed devices other than in-feed hopper and loading magazine; NOTE 1 For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4. b) out-feed devices other than unloading table, except for hazards related to ejection from the machine due to climb cutting; c) out-feed of workpieces on machines with feed speed higher than 60 m/min; NOTE 2 Machines with feed speed higher than 60 m/min are usually combined with mechanical unloading and workpiece transfer systems. d) machines being used in combination with any other machine (as part of a line). It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication. |
| 국제분류(ICS)코드 |
13.110 : 기계 안전성
79.120.10 : 목공 기계 |
| 페이지수 | 45 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19085-14:2021 | Woodworking machines — Safety — Part 14: Four-sided moulding machines | 2021-10-15 | 표준 |
ISO/FDIS 19085-15 - Woodworking machines — Safety — Part 15: Presses 상세보기
ISO/DIS 19085-13 - Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading 상세보기
ISO/DIS 19085-20 - Woodworking machines — Safety — Part 20: Horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) 상세보기
ISO/DIS 19085-21 - Woodworking machines — Safety — Part 21: Double blade circular sawing machines for cross-cutting with integrated feed 상세보기
ISO/DIS 19085-22 - Woodworking machines — Safety — Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines 상세보기
ISO/TS 21331:2020 - Graphic technology and deinked pulp — Guidance for assessing the deinking performance of printed paper products 상세보기
ISO/TR 21141:2022 - Timber structures — Timber connections and assemblies — Determination of yield and ultimate characteristics and ductility from test data 상세보기
ISO 19085-13:2020 - Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading 상세보기
ISO 19085-12:2021 - Woodworking machines — Safety — Part 12: Tenoning/profiling machines 상세보기
ISO 19085-11:2020 - Woodworking machines — Safety — Part 11: Combined machines 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
