관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Woodworking machines — Safety — Part 11: Combined machines
| 분야 | ISO/TC 39/SC 4 : Woodworking machines |
|---|---|
| 적용범위 | This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as "machines". The integrated working units can be of these types only: — a sawing unit; — a moulding unit; — a planing unit. The machines are designed to cut solid wood and material with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085‑1:2017, 3.4 and 3.5. This document deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. This document does apply to machines also equipped with the devices/additional working units listed in the Scopes of ISO 19085‑5:2017, ISO 19085‑6:2017, ISO 19085-7:2019 and ISO 19085-9:2019. This document does not apply to: a) machines incorporating only a planing unit and a mortising device; NOTE 3 Such machines are dealt with in ISO 19085-7:2019. b) combined machines incorporating a band saw unit; c) machines with a mortising unit with a separate drive other than the planing unit drive; d) machines intended for use in potentially explosive atmosphere; e) machines manufactured before the date of its publication as an International Standard. |
| 국제분류(ICS)코드 |
13.110 : 기계 안전성
79.120.10 : 목공 기계 |
| 페이지수 | 27 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19085-11:2024 | Woodworking machines — Safety — Part 11: Combined machines | 2024-07-23 | 표준 |
| 2 | ISO 19085-11:2020 | Woodworking machines — Safety — Part 11: Combined machines | 2020-03-20 | 구판 |
ISO/FDIS 19085-15 - Woodworking machines — Safety — Part 15: Presses 상세보기
ISO/DIS 19085-13 - Woodworking machines — Safety — Part 13: Multi-blade rip sawing machines with manual loading and/or unloading 상세보기
ISO/DIS 19085-20 - Woodworking machines — Safety — Part 20: Horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) 상세보기
ISO/DIS 19085-21 - Woodworking machines — Safety — Part 21: Double blade circular sawing machines for cross-cutting with integrated feed 상세보기
ISO/DIS 19085-22 - Woodworking machines — Safety — Part 22: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines 상세보기
ISO 19085-1:2021 - Woodworking machines — Safety — Part 1: Common requirements 상세보기
ISO 19085-2:2021 - Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines 상세보기
ISO/TS 14778:2021 - Paper and board — Measurement of water contact angle by optical methods 상세보기
ISO 19085-5:2017 - Woodworking machines — Safety — Part 5: Dimension saws 상세보기
ISO 19085-4:2018 - Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
