관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil
| 분야 | ISO/TC 182 : Geotechnics |
|---|---|
| 적용범위 | ISO/TS 17892-2:2004 specifies methods of test for the determination of the bulk and dry density of intact soil or rock within the scope of the geotechnical investigations according to prEN 1997-1 and prEN 1997-2. The bulk density of a soil is useful in the determination of the in-situ overburden stresses at various depth (geostatic stresses). Furthermore, bulk and dry density can qualitatively describe the mechanical characteristics of a soil via empirical relationships which are to be found in the technical literature. Such relationships should be used only as guidelines and should be supplemented by direct measurements of the mechanical characteristics. This document describes three methods: a) linear measurements method; b) immersion in water method; c) fluid displacement method. The linear measurement method is suitable for the determination of the density of a specimen of cohesive soil of regular shape, including specimens prepared for other tests. The specimens used are normally in the form of either rectangular prisms or straight cylinders. The immersion in water method covers the determination of the bulk density and dry density of a specimen of natural or compacted soil by measuring its mass in air and its apparent mass when suspended in water. The method is employable whenever lumps of material of suitable size can be obtained. The fluid displacement method covers the determination of the bulk density and dry density of a specimen of soil by measuring mass and displacement of water or other appropriate fluid after immersion. The method is employable whenever lumps of material of suitable size can be obtained. |
| 국제분류(ICS)코드 |
93.020 : 토공. 굴착. 기초건설. 갱내작업
13.080.20 : 토양의 물리적 특성 |
| 페이지수 | 11 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 17892-2:2014 | Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density | 2014-11-28 | 표준 |
| 2 | ISO/TS 17892-2:2004 | Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil | 2004-10-21 | 구판 |
ISO 17892-1:2014 - Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content 상세보기
ISO 17892-2:2014 - Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density 상세보기
ISO 17892-3:2015 - Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density 상세보기
ISO 17892-4:2016 - Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution 상세보기
ISO 17892-5:2017 - Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
