관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
| 분야 | ISO/TC 108/SC 2 : Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures |
|---|---|
| 적용범위 | This part of ISO/TS 10811 defines a method for the classification of shock and vibration in buildings from measurements in accordance with ISO/TS 10811-1. A classification system of environmental vibration conditions should serve as guidelines for designers, manufacturers and users of equipment sensitive to shock and vibration, and for building constructors. The types of shock and vibration considered are those transmitted from floors, tables, walls, ceilings or isolation systems into an equipment unit. They can be generated by the following: a) external sources, for example traffic (by road, rail or air), or building and construction activities such as blasting, piling and vibratory compaction; the vibration response to sonic booms and acoustical excitations is also included, as well as weather-induced vibration; b) equipment for indoor use, such as punch presses, forging hammers, rotary equipment (air compressors, air conditioner systems, etc.) and heavy equipment transported or operated inside a building; c) human activities in connection with the service or operation of the equipment, for example, people walking, especially on raised floors. The frequency range of interest is normally 2 Hz to 200 Hz. Normally the dominant frequencies are less than 100 Hz because they represent the response of the elements in the building. This part of ISO/TS 10811 deals only with vibration from a maximum amplitude point of view. The concept of vibration dose (for example as for estimation of fatigue life) is not treated. |
| 국제분류(ICS)코드 |
91.120.25 : 지진 및 진동 방지
17.160 : 진동. 충격 및 진동측정 |
| 페이지수 | 10 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO/TS 10811-2:2000 | Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification | 2000-06-08 | 표준 |
ISO/TS 10811-1:2000 - Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation 상세보기
ISO/TS 10811-1:2000 - Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation 상세보기
ISO 2631-5:2018 - Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks 상세보기
ISO 2631-1:1997/Amd 1:2010 - Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements — Amendment 1 상세보기
ISO 4866:2010 - Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures 상세보기
ISO 2631-2:2003 - Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
