한국표준정보망(KSSN)

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)

언어	제공형태	판매가격	선택
영어	PDF	100,300원
영어	PRINT	100,300원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

분야	ISO/TC 61/SC 9 : Thermoplastic materials
적용범위	ISO 16770:2004 specifies a method of determining the stress cracking resistance of polyethylene materials in any environment. The test is carried out on notched test specimens cut from compression-moulded sheet or finished products, as applicable. The test specimen is subjected to a static tensile load when immersed in an environment such as a surfactant solution held at a specified temperature, and the time to failure measured. The method has been specifically developed for polyethylene materials but can be used to evaluate PE extrusions, such as pipe segments, PE fusion welds/fittings and blow-moulded PE containers to study the effect of aggressive environments, i.e. dangerous goods/chemicals. The method may also be adapted for other thermoplastic materials, e.g. polypropylene (PP). In this case, care must be taken in interpreting the results as the processing stresses/orientation in finished products may have an effect.
국제분류(ICS)코드	83.080.20 : 열가소성 수지재
페이지수	13
Edition	1

No.	표준번호	표준명	발행일	상태
1	ISO 16770:2019	Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)	2019-09-25	표준
2	ISO 16770:2004	Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)	2004-01-19	구판