관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
| 분야 | TC 48/SC 48B : Electrical connectors |
|---|---|
| 적용범위 | IEC 60352-3:2020 is applicable to ID connections which are accessible for tests and measurements according to Clauses 6 through 8 and which are made with – appropriately designed accessible ID terminations, – wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter, – wires having stranded conductors of 0,05 mm2 to 10 mm2 cross-sectional area, for use in electrical and electronic equipment and components. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmen-tal conditions. There are different designs and materials for accessible ID terminations in use. For this reason only fundamental parameters of the termination are specified, while the perfor-mance requirements of the wire and the complete connection are specified in full detail. The purpose of this document is: – to determine the suitability of accessible ID connections under specified mechanical, electrical and atmospheric conditions; – to provide a means of comparing test results when the tools used to make the con-nections, if any, are of different designs or manufacture. This second edition cancels and replaces the first edition published in 1993. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the pre-vious edition: a) Subclause 7.2.2: reduce the limit of duration of contact disturbance to 1 µs. b) Subclause 7.2.3: reduce the limit of duration of contact disturbance to 1 µs. c) Transferred Clauses 9 to 13 to Annex A (informative). d) The figures were revised for clarity. |
| 국제분류(ICS)코드 | 29.120.20 : 연결장치 |
| 페이지수 | 81 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60352-3:2020 | Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance | 2020-04-09 | 표준 |
| 2 | IEC 60352-3:1993/COR1:1995 | Corrigendum 1 - Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance | 1995-11-01 | 구판 |
| 3 | IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance | 1993-02-08 | 구판 |
IEC 60352-1:1997 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-1:1997/COR1:1998 - Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-8:2011 - Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-4:2020 - Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-5:2020 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
