관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Insulation co-ordination - Part 1: Definitions, principles and rules
| 분야 | TC 99 : Insulation co-ordination and system engineering of high voltage electrical power installations above 1,0 kV AC and 1,5 kV DC |
|---|---|
| 적용범위 | IEC 60071-1:2019 applies to three-phase AC systems having a highest voltage for equipment above 1 kV. It specifies the procedure for the selection of the rated withstand voltages for the phase-to-earth, phase-to-phase and longitudinal insulation of the equipment and the installations of these systems. It also gives the lists of the standard withstand voltages from which the rated withstand voltages are selected. This document describes that the selected withstand voltages are associated with the highest voltage for equipment. This association is for insulation co-ordination purposes only. The requirements for human safety are not covered by this document. Although the principles of this document also apply to transmission line insulation, the values of their withstand voltages can be different from the standard rated withstand voltages. The apparatus committees are responsible for specifying the rated withstand voltages and the test procedures suitable for the relevant equipment taking into consideration the recommendations of this document. NOTE In IEC 60071-2, all rules for insulation co‑ordination given in this document are justified in detail, in particular the association of the standard rated withstand voltages with the highest voltage for equipment. When more than one set of standard rated withstand voltages is associated with the same highest voltage for equipment, guidance is provided for the selection of the most suitable set. The main changes from the previous edition are as follows: - all references are updated to current IEC standards, and the bibliography is deleted; - some definitions are clarified in order to avoid overlapping and ensure clear understanding; - letter symbols are changed and corrected in order to keep the consistency with relevant IEC standards; - some titles are changed to clarify understanding (see Clauses A.2, A.3 and Annex B). It has the status of a horizontal standard in accordance with IEC Guide 108. |
| 국제분류(ICS)코드 | 29.080.30 : 절연 시스템 |
| 페이지수 | 70 |
| Edition | 9.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60071-1:2019 | Insulation co-ordination - Part 1: Definitions, principles and rules | 2019-08-08 | 표준 |
| 2 | IEC 60071-1:2019 RLV | Insulation co-ordination - Part 1: Definitions, principles and rules | 2019-08-08 | 표준 |
| 3 | IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules | 2011-03-30 | 구판 |
| 4 | IEC 60071-1:2006/AMD1:2010 | Amendment 1 - Insulation co-ordination - Part 1: Definitions, principles and rules | 2010-01-14 | 구판 |
| 5 | IEC 60071-1:2006 | Insulation co-ordination - Part 1: Definitions, principles and rules | 2006-01-23 | 구판 |
| 6 | IEC 60071-1:1993 | Insulation co-ordination - Part 1: Definitions, principles and rules | 1993-11-30 | 구판 |
| 7 | IEC 60071-1:1976 | Insulation co-ordination - Part 1: Terms, definitions, principles and rules | 1976-01-01 | 구판 |
IEC 60071-3:1982 - Insulation co-ordination - Part 3: Phase-to-phase insulation co-ordination - Principles, rules and application guide 상세보기
IEC TS 60071-5:2002 - Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations 상세보기
IEC TR 60071-4:2004 - Insulation co-ordination - Part 4: Computational guide to insulation co-ordination and modelling of electrical networks 상세보기
IEC 60071-5:2014 - Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations 상세보기
IEC 60071-1:2019 RLV - Insulation co-ordination - Part 1: Definitions, principles and rules 상세보기
IEC 60071-2:2018 - Insulation co-ordination - Part 2: Application guidelines 상세보기
IEC TR 60034-16-2:1991 - Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies 상세보기
IEC 60146-2:1999 - Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters 상세보기
IEC 60076-5:2006 - Power transformers - Part 5: Ability to withstand short circuit 상세보기
IEC 60034-22:2009 - Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
