관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
| 분야 | TC 89 : Fire hazard testing |
|---|---|
| 적용범위 | IEC 60695-2-11:2014 specifies a test method on an end product. It is intended to simulate the effects of thermal stresses produced by an electrically heated source to represent a fire hazard. This test method is used to check that, under defined test conditions, an end product exposed to an electrically heated source has either a limited ability to ignite or, if it ignites, a limited ability to propagate flame. However, the fire hazard analysis, the flammability aspects and the flame spreading to otherproducts are not covered by the present standard. This second edition of IEC 60695-2-11 cancels and replaces the first edition of IEC 60695-2-11 published in 2000. It constitutes a technical revision. The main changes with respect to the previous edition are: - the Introduction has been added to provide background and how it relates to the Scope, - the Scope has been modified for greater clarity and reference to basic safety publications, - numerous terms and definitions relevant to this Standard have been added to Clause 3, - the application of "small parts" and "insignificant mass" have been introduced and clarified, - the different types of specimens, how to specify them, and limitations of the test method have been further clarified in Clause 4, - clarified in Clause 5 the distance to specified layer when unknown, - the information from Clause 6 has been moved into the test procedure in Clause 8, - the conditioning of the specified layer and the laboratory ambient test conditions were clarified in Clause 7, - measurement of the maximum flame height was removed from Clause 9, - the reference to this test as "GWEPT" was introduced along with an applicable title change and - Annex A has been revised to reflect current practice by prominent product committees. Key words: Glowing/hot-wire, Glow wire, Flammability, Fire hazard This publication is to be read in conjunction with IEC 60695-2-10:2013. |
| 국제분류(ICS)코드 |
13.220.40 : 자재 및 제품의 점화성 및 연소성
29.020 : 전기 공학 일반 |
| 페이지수 | 30 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60695-2-11:2021 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT) | 2021-10-28 | 표준 |
| 2 | IEC 60695-2-11:2021 RLV | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT) | 2021-10-28 | 표준 |
| 3 | IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) | 2014-02-06 | 구판 |
| 4 | IEC 60695-2-11:2014 RLV | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) | 2014-02-06 | 구판 |
| 5 | IEC 60695-2-11:2000/COR1:2001 | Corrigendum 1 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products | 2001-01-24 | 구판 |
| 6 | IEC 60695-2-11:2000 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products | 2000-10-09 | 구판 |
IEC 60695-1-2:1982 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for electronic components 상세보기
IEC 60695-3-1:1982 - Fire hazard testing. Part 3: Examples of fire hazard assessment procedures and interpretation of results. Combustion characteristics and survey of test methods for their determination 상세보기
IEC 60695-2-3:1984 - Fire hazard testing. Part 2: Test methods. Bad-connection test with heaters 상세보기
IEC 60695-1-3:1986 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for use of preselection procedures 상세보기
IEC 60695-2-4/1:1991 - Fire hazard testing - Part 2: Test methods - Section 4/Sheet 1: 1 kW nominal pre-mixed test flame and guidance 상세보기
IEC 60695-11-5:2016 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance 상세보기
IEC 60695-10-2:2014 - Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method 상세보기
IEC 60695-2-13:2010+AMD1:2014 CSV - Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials 상세보기
IEC 60695-2-10:2013 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure 상세보기
IEC 60112:2003+AMD1:2009 CSV - Method for the determination of the proof and the comparative tracking indices of solid insulating materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
