관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
| 분야 | TC 48/SC 48B : Electrical connectors |
|---|---|
| 적용범위 | IEC 60352-5:2012 is applicable to solderless press-in connections for use in telecommunication equipment and in electronic devices employing similar techniques. The press-in connection consists of a termination having a suitable press-in zone which is inserted into a plated-through hole of a double-sided or multilayer printed board. Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions. The object of this part of IEC 60352 is to determine the suitability of press-in connections under mechanical, electrical and atmospheric conditions as specified by the manufacturer of the press-in termination and to provide a means of comparing test results when the tools used to make the connections are of different designs or manufacture. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - enhancement of Annex A and further application remarks are added; - editorial changes throughout the standard to prevent the document from being misunderstood as specification for establishing press-in connection in total; - deletion of all tables with hole dimensions. Historically the hole dimensions were constrained because of the dimensions of the wire wrap and clip connections posts. Since these connection technologies are no longer commonly used, the design requirements are no longer practical; - inclusion of additional figures and one table in 4.4.4 to define tolerance ranges for holes in test-boards and to illustrate them; - inclusion of a requirement for the thickness of the test-board in 4.4. The contents of the corrigendum of September 2014 have been included in this copy. |
| 국제분류(ICS)코드 | 31.220.10 : 플러그-소켓 장치. 연결기 |
| 페이지수 | 66 |
| Edition | 4.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60352-5:2020 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2020-07-22 | 표준 |
| 2 | IEC 60352-5:2012/COR1:2014 | Corrigendum 1 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2014-09-03 | 구판 |
| 3 | IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2012-02-22 | 구판 |
| 4 | IEC 60352-5:2008 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2008-01-10 | 구판 |
| 5 | IEC 60352-5:2001+AMD1:2003 CSV | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2003-12-19 | 구판 |
| 6 | IEC 60352-5:2001/AMD1:2003 | Amendment 1 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2003-10-23 | 구판 |
| 7 | IEC 60352-5:2001 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | 2001-03-09 | 구판 |
| 8 | IEC 60352-5:1995 | Solderless connections - Part 5: Solderless press-in connections - General requirements, test methods and practical guidance | 1995-01-25 | 구판 |
IEC 60352-1:1997 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-1:1997/COR1:1998 - Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-8:2011 - Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-3:2020 - Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-4:2020 - Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance 상세보기
IEC 60352-5:2012/COR1:2014 - Corrigendum 1 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
