관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Arc welding equipment - Part 6: Limited duty equipment
| 분야 | TC 26 : Electric welding |
|---|---|
| 적용범위 | IEC 60974-6:2010 specifies safety and performance requirements applicable to limited duty arc welding and cutting power sources, and auxiliaries designed for use by laymen. Electrically powered equipment is intended to be connected to the single phase public low-voltage supply system. Engine driven power sources can not exceed output power of 7,5 kVA. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main significant technical changes with respect to the previous edition are the following: - extension of the scope; - amendment of the title; - touch current at fault condition (see 6.3.7); - new definition of thermal requirements based two independent devices, one for thermal protection and one for thermal control (see 7.1); - new definition for thermal performances at 20 °C (see 7.2); - thermal safety requirements are based on operating temperature for normal condition and maximum temperature in overload condition (see 7.4); - addition of abnormal operation test for thermal control device (see 10.4); - new requirement for auxiliaries (see Clause 16); - new rating plate definition (see Clause 17); - introduction of new mandatory warning symbols (see 12.1.117.3, Box 17b) and 19.2); - induced changes due to publication of IEC 60974-1:2005. This publication is to be read in conjunction with IEC 60974-1:2005. |
| 국제분류(ICS)코드 | 25.160.30 : 용접장비 |
| 페이지수 | 74 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60974-6:2015 | Arc welding equipment - Part 6: Limited duty equipment | 2015-09-22 | 표준 |
| 2 | IEC 60974-6:2010 | Arc welding equipment - Part 6: Limited duty equipment | 2010-11-29 | 구판 |
| 3 | IEC 60974-6:2003 | Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources | 2003-01-30 | 구판 |
IEC 60974-6:2015 - Arc welding equipment - Part 6: Limited duty equipment 상세보기
IEC 60974-4:2016 - Arc welding equipment - Part 4: Periodic inspection and testing 상세보기
IEC 60974-9:2018 - Arc welding equipment - Part 9: Installation and use 상세보기
IEC 60974-9:2018 RLV - Arc welding equipment - Part 9: Installation and use 상세보기
IEC 60974-14:2018 - Arc welding equipment - Part 14: Calibration, validation and consistency testing 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
