관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
| 분야 | TC 65/SC 65B : Measurement and control devices |
|---|---|
| 적용범위 | It defines the testing and reporting of the step response of control valves that are used in throttling closed-loop control applications. A control valve consists of the complete, ready-to-use assembly of the control valve body, the actuator, and any required accessories. The most probable accessory is a valve positioner. It defines how to test, measure, and report control valve response characteristics in an open-loop environment. This information can be used for process control applications to determine how well and how fast the control valve responds to the control valve input signal. The contents of the corrigendum of June 2008 have been included in this copy. |
| 국제분류(ICS)코드 |
25.040.40 : 산업 공정 측정 및 제어
23.060.40 : 압력 조절기 |
| 페이지수 | 54 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60534-9:2007/COR1:2008 | Corrigendum 1 - Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs | 2008-06-11 | 표준 |
| 2 | IEC 60534-9:2007 | Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs | 2007-09-10 | 표준 |
IEC 60534-3:1976 - Industrial-process control valves. Part 3: Dimensions - Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves 상세보기
IEC 60534-2:1978 - Industrial-process control valves. Part 2: Flow capacity. Section One: Sizing equations for incompressible fluid flow under installed conditions 상세보기
IEC 60534-2-2:1980 - Industrial-process control valves. Part 2: Flow capacity. Section Two: Sizing equations for compressible fluid flow under installed conditions 상세보기
IEC 60534-6:1985 - Industrial-process control valves. Part 6: Mounting details for attachment of positioners to control valve actuators 상세보기
IEC 60534-6-1:1997 - Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators 상세보기
IEC 60534-6-1:1997 - Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators 상세보기
IEC 60534-6-2:2000 - Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators 상세보기
IEC 60534-1:2005 - Industrial-process control valves - Part 1: Control valve terminology and general considerations 상세보기
IEC 60534-8-4:2015 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow 상세보기
IEC 60364-4-41:2005+AMD1:2017 CSV - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
