관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Certification of welding inspectors
| 분야 | |
|---|---|
| 적용범위 | Preface This is the seventh edition of CSA W178.2, Certification of welding inspectors. It supersedes the previous editions, published in 2014, 2008, 2001, 1996, 1990, and 1982. This Standard provides requirements for those seeking certification as welding inspectors. Individuals may be certified in accordance with this Standard regardless of whether they are employed by an inspection organization. The effectiveness of welding inspection depends largely on the knowledge and integrity of the individual responsible for carrying out the inspection. Thus, there is a need for inspectors with both appropriate knowledge and the capability of exercising responsible judgment. This Standard is not intended to replace an employer’s final responsibility for the work or a supervisor’s judgment of an individual’s suitability to perform a given task. Scope 1.1 This Standard covers the certification of welding inspectors at three certification levels. It specifies the responsibilities and the basic technical functions associated with each level. 1.2 This Standard specifies the requirements for the periodic review of welding inspector certification, including vision tests. 1.3 This Standard, by including a code of ethics for the welding inspector, defines principles of practice and conduct for maintaining certification. 1.4 To assist candidates in preparing for examinations, this Standard contains knowledge requirements (see Annex A) covering a) welding fundamentals; b) welding inspection; and c) welding metallurgy. This Standard also includes a list of relevant reference publications (see Annex B). 1.5 This Standard does not address safety issues associated with welding. It is the responsibility of the users of this Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations. Note: CSA W117.2 addresses safety in welding, cutting, and allied processes. 1.6 This Standard does not address the certification of individuals performing non-destructive examinations using radiographic, ultrasonic, eddy current, magnetic particle, or liquid penetrant methods. CAN/CGSB-48.9712/ISO 9712 specifies the requirements for the certification of individuals performing these non-destructive examination methods. 1.7 This standard is not intended to specify the qualifications or supervision required to perform inspection work. Inspector competencies are provided only to aid in establishing training, experience, and testing objectives for each level. 1.8 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 26 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA W178.2:18 (R2023) | Certification of welding inspectors | 2018-01-01 | 표준 |
관련상품이 존재하지 않습니다.
G40.20-13/G40.21-13 (R2023) - General requirements for rolled or welded structural quality steel/Structural quality steel 상세보기
CSA A23.1:19/CSA A23.2:19 - Concrete materials and methods of concrete construction/Test methods and standard practices for concrete 상세보기
CSA W178.1:18 (R2023) - Certification of welding inspection organizations 상세보기
CSA S16:19 - Design of steel structures 상세보기
CSA Z662:19 - Oil and gas pipeline systems 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
