관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
절판(중지)
Liquefied natural gas (LNG) - Production, storage, and handling
| 언어 | 제공형태 | 판매가격 | 선택 |
|---|---|---|---|
|
영어 |
보안PDF |
604,200원 |
|
| 분야 | |
|---|---|
| 적용범위 | Preface? This is the eleventh edition of CSA Z276, Liquefied natural gas (LNG) ? Production, storage, and handling. It supersedes the previous editions published in 2015, 2011, 2007, 2001, 1994, 1989, 1981, 1978, 1973, and 1972.? This Standard contains basic reference data relating to design, supplemented by specific requirements, where necessary, to establish a uniform interpretation of the design requirements.? The main differences from the previous edition are the? a) reordering and rewriting of Clauses 4 and 5;? b) addition of Clause 14; and? c) expansion of Annex B for small facilities.? CSA Group would like to acknowledge the financial contributions of industry partners in the development of Annex B. The Technical Committee on Liquefied Natural Gas would like to acknowledge the efforts of the Annex B Task Force to significantly expand the requirements for small facilities.? This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to the? a) design;? b) location;? c) construction;? d) operation; and? e) maintenance? of facilities for the liquefaction of natural gas and facilities for the storage, vaporization, transfer, handling, and truck transport of LNG. It also contains requirements for the training of personnel.? 1.2 1.2.1 For facilities that load or unload LNG from a marine vessel, this Standard contains requirements for the interconnecting piping between the loading/unloading arm flange and the storage tank(s), and other piping and appurtenances on the pier or jetty itself.? 1.2.2 Guidelines for LNG vehicle fuelling stations used for fleet and public LNG vehicle fuel dispensing operations are given in Annex D. (See the definition of "Fuelling station" in Clause D.2.)? 1.2.3 The requirements for small LNG facilities are given in Annex B. (See the definition of "Small facility" in Clause 3.)? 1.2.4 The requirements for mobile and portable LNG equipment used on a temporary or permanent basis are covered in Annex B.? 1.3 This Standard does not apply to the following:? a) frozen ground containers;? b) floating LNG facilities;? c) the transportation of refrigerants by any means;? d) the transportation of LNG by railcar or marine vessel;? e) the transportation of LNG or regasified LNG by pipeline beyond the facility boundary, except as specified in Clause 1.2.1; and? f) facilities designed for the use of LNG as a fuel for railroad locomotives, or marine vessels.? 1.4 All references to pressure throughout this Standard refer to gauge pressures unless otherwise specified.? 1.5 All pipe sizes refer to nominal pipe sizes (NPS).? 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.? 1.7 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 214 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA Z276:22 | Liquefied natural gas (LNG) - Production, storage, and handling | 2022-01-01 | 표준 |
관련상품이 존재하지 않습니다.
ISO 16903:2015 - Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection 상세보기
GB/T 32964-2016 - Welded stainless steel pipes for liquefied natural gas 상세보기
GB/T 20368-2012 - Production,storage and handling of liquefied natural gas(LNG) 상세보기
GB/T 26980-2011 - Liquefied natural gas(LNG)vehicular fueling systems code 상세보기
GB/T 22724-2008 - Installation and equipment for liquefied natural gas—Design of onshore installations 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
